with top and bottom label, and the shrink film, then the carton
hot sale ALUMINIUM self adhesive bitumen waterproof tapes
1,Could be used on concrete, stick and steel.
Hot sale ALUMINIUM self adhesive bitumen waterproof tapes
High quality Huiyuan Peel & Seal 3 metre roll of self-adhesive flashing tape. This easy to use, tough but flexible tape is suitable for general repairs and sealing use. It is weather proof and provides long lasting protection. Keep the water out!
Also available in popular 10 meter,20 meter roll with: 50mm, 75mm, 100mm, 150mm, 225mm, 300mm, 450mm & 600mm widths.
Why buy HUIYUN bitumen tape?
The strength of the facing gives resistance to puncturing and the bitumen gives flexibility and adhesion but without the problems of slump.Designed for use as flashing on flat and pitched roofs, roof valleys, parapets and chimney stacks.Also ideal for sealing around RSJ's, flues, concrete columns, roof-lights, guttering and extractor vents.
* Replacement of worn Lead Flashing * Lead coloured - blends with existing lead * Crease resistant * Easy to apply
Suitable for many uses and can be used on:-
* Replacement or repair of flashing * Guttering, down pipes, skylights * Extensions, porches & chimneys * Caravans & Conservatories * Sealing parapets, valley gutters * Seals capping bolts & roof ridges * Roof repair of portable buildings
Note: - In cold temperatures the tape will be harder to work with and not appear to stick as well as when warm or warmed.
Store in a cool, dry place.(+5 dg C AND 25 dg C)
HUIYUAN Flashing tape can be overpainted with conventional decorative paints, though a little staining many occur at the edges.
Some brief guidelines for Huiyuan bitumen tape...
Ensure all surfaces are clean, dry and dust-free. Remove any loose particles and any rust with a wire brush & soft broom.
The use of gloves is recommended.
Rough, porous or friable surfaces (such as wood, cement boards, course brickwork, breeze blocks etc..) should be primed with a bituminous primer and allowed to dry in order to improve bonding strength. (we sell primer in 1ltr 2.5ltr and 5litre tins)
Roll out the flashing strip then cut to the required measured length
Remove the backing paper (peel back 150mm) and place the adhesive side to the previously prepared surface
To ensure a tight contact - smooth the tape down with a dry cloth, removing all the air bubbles
Press the tape to the surface firmly once in position
Repeat the steps 2-4 in 300mm to 600mm sections until the area is covered
If the tape is joined ensure all overlaps are greater than 25mm
Smooth flat all edges with a wallpaper roller or trowel
After use reseal pack and store upright in cool, dry condition
Specification of bitumen tape
10 / 3metres
0.5 / 0.15m2
10 / 3metres
0.75 / 0.225m2
10 / 3metres
1 / 0.3m2
10 / 3metres
1.5 / 0.45m2
2.25 / 0.675m2
Technical data of bitumen tape
Retention time,min ≥
90 degree No slippage, flowing, dropping.
Tensile force N/50mm ≥
Elongation at break,% ≥
-20°C,Φ20mm,3s,180°C. No crack.
Between membranes ≥
2.0 or fracture on the external agglutination section
fracture on the external agglutination section
Between membrane and aluminum plate ≥
Peel strength,N/mm ≥
1.5 or fracture on the external agglutination section
Shandong Huiyuan Building Materials Group Co., Ltd. is one of the largest manufacturers of construction materials in China. We can supply waterproof materials, plastic-steel luminous wall covers, light wall boards, Mg-fiberglass fireproof decoration boards, plastic products, paints and wooden products.
Being environmentally friendly, our products are exported to Southeast Asia, the Middle East, West Europe, Africa, and Australia. We have won a good reputation among customers around the ... View detail