1.Composition:Mixed up with amino resin, alkyd resin, pigment, corporeity pigment and organic solvent.
Good adhesion to putty and top-coating, nice oil-resistance, applied to the interlayer and bottom coat of sartorius, bicycles and instruments which have been covered with putty.
Primary Paint Viscosity:(25°C)≥60s(-4 glasses)
Application Thickness:2-3 lines
Theoretic Painting Area:6-10 m2/kg
First Painting Thickness:wet film thickness:40-59 μm dry film thickness:20-30 μm
Drying Time: drying for 2h (120±2°C)
Painting Distance:(25°C), 2h is the minimum and no maximum.
4.Thinnerx-4 thinner for amino varnish thinning quantity 0-5 %(according to the weight)
6.Referenced Application Viscosity:spray for 17-23 s
Surface Treatment:Get rid of the surface smear, moisture and dust etc
In order to avoid the steam from coagulating, the temperature should be above zero centigrade and the relative humidity should be lower than 80%, good aeration in course of drying.
8.Painting Corollary Coating:Last Painting Corollary Coating:amino enamel or alkyd enamel
Spray in places with good aeration conditions and take relevant safety measures if necessary. Pay attention to fireproofing.
12. Responsibility Announcement:
The data here can be used only as the using guidance, anyone who wants to use our product for special using must query us for that, otherwise we are not responsible for any subsequently effect and damage. The data in the guidance can be changed with our products’ development and our experience’s accumulation.