Agent A: 10kg/pail; Agent B: 10kg/pail We can also packing Dirtproof Economical Sealant For Clothes as your requirement.
Within 25-30 days upon receipt of your L/C or 30% deposit
instant bond glue for electronic is one of our most popular products.Against moisture, dirt and other atmospheric.....
instant bond glue for electronic
ZR340 instant bond glue for electronic is a room temperature/heating curing and molding organic silicone materials. This kind of two-component elastic silicone potting, designed to protect in harsh conditions of electronic products.
ZR340 instant bond glue for electronic used new technology without heating , would be curing. When used according to 1:1 (weight ratio or the volume in the thorough mixing proportion of A and B two components, products will be in A certain time, form of the elasticity of curing buffer material.
After curing glue has the following characteristics:
Against moisture, dirt and other atmospheric composition
Relieve mechanical, thermal shock and vibration of mechanical stress and tension caused
Easy to repair
High frequency electric performance
No solvents, no cure by-products
Have stable mechanical and electrical properties between -50°C-200°C
Excellent flame retardancy
Black viscous liquid
white viscous liquid
Unit or conditions
60/0.5 or 25/10
Operation time is a quantity of cement with 100 g.
A, B two components in proportion to remove, stir to mix evenly, vacuum suction bubbles in operation period, remove the need of the potting casting products, if the potting product is too big, can divide times, then potting according to (60 °C / 30 min or 25 °C / 10 hr) can be cured.
Agent A place for a long time, maybe produce precipitation, mix part A and B access should be paid attention to save after sealing.
Mixing should pay attention to the same direction, otherwise, it will stir with too much bubble; Borders and the bottom of the container sizing material should also stir well, can appear otherwise stir caused by uneven local not curing phenomenon.
Casting the product vacuum pumping, remove again bubble can improve after curing products comprehensive performance.
Temperature is too low will lead to curing speed partial slow, heat cure advice; Potting thickness more than 2 cm above 80 °C not directly in the curing, lest cause explosive together.
ZR340 with contain N, S, P element of compounds and some heavy metal ion compounds, will appear difficult contact curing or not curing phenomenon. These heavy metal ions including Sn, Pb, Hg, Bi, As, etc.
Remark:All the above data come from 25 °C and 55% RH glue curing conditions after 7 days.
Agent A: 10kg/pail; Agent B: 10kg/pail
Storage and transportation:
Part A and part B need to avoid light, heat, save after sealed. (Can be used as the non-dangerous goods transport and storage)
Shanghai Jorle Fine Chem. Co., Ltd. is a manufacturer of silicone, epoxy and polyurethane, with well-equipped testing equipment and strong technical force. With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in LED, power, electronics, new energy and other industries.
"The customer is highest, trustworthiness first" is the tenet of our company. Being an innovative company, our company always pays attention to economic, ecological and ... View detail