About 2199 results:
Silicone Rubber (1737)

liquid rtv silicone rubber for artificial stone mold

FOB Price: Get Latest Price
Min.Order Quantity: 200 Kilogram/Kilograms
Supply Ability: 50000 Kilogram/Kilograms per Month
Port: GUANGZHOU
Payment Terms: L/C,T/T
Add to My Favorites

Quick Details

Place of Origin:
Guangdong China (Mainland)
Brand Name:
CONSON
Model Number:
CSN-8735S
Appearanace:
Milky white
Viscosity(Cps,25°C):
9000±1000
Hardenerdosage (%)or weight ratio(A:B):
1:1 or 10:1
Pot life (min):
10-60
Demolding time(h):
0.5-2
Hardness (shore A):
35
Tensile strengh (Mpa):
6.0
Tear strength(KN/m):
30
Elongation(%):
>500
Shrinkage(%):
<0.1

Packaging & Delivery

Packaging Detail: 5kg/pail, 25 kg/pail, 200 kg/pail
Delivery Detail: 7 days ofter payment

Specifications

Moderate hardness, high tear strength, extremely low shrinkage and less deformation, addition cure

Technical Properties:

 

 Moderate hardness, high tear strength, extremely low shrinkage and less deformation, addition cure

ModelCSN-8735S
AppearanceMilkwhite
Viscosity(cps,25°C)9000±1000
Hardener dosage (%) or weight ratio(A:B)1:1 or 10:1
Pot life(min)10-60
Demolding time(h)0.5-2
Hardness(shore A)35
Tensile strength(MPa)6.0
Tear strength(KN/m)30
Elongation(%)>500
Shrinkage(%)<0.1

 

 

 Application:

 

For reproduction of rough lines and bigger articles from culture stone and artificial stone, such as cobble stone, castle stone, and art stone, etc.

 

INTRODUCTION: 

    We are a leading Chinese manufacturer of RTV(room temperature vulcanized) liquid silicone rubber for mold making, which is widely applicable to multipule fields and purposes, including candle casting, resin casting, polyurethane casting, gypsum product reproduction, lifecasting,  food casting, metal casting, concrete casting, etc.
    Our RTV silicone rubber for mold making, is normally of milkwhite color and in a viscous liquid state. It is composed of 2 parts(A:silicone rubber, B:curing agent). When the 2 parts are mixed in a proper ratio and applied to the model in room temperature, the liquid rubber would cure into solid state within a "curing time", which is adjustable depending on the user's requirements.

    Our silicone rubber falls into 2 categories, namely addition cure(platinum-cured) and condensation cure(tin- cured). For each category, we have different items of different hardness, viscosity and curing time to cater to different users' requirements. Users can use it for different operations like pouring molds and brushing molds etc.

 

Advantages:

1. Good fluidity. ensures convenience of operation.

2. High tear resistance strengh, which promises many times of reproduction without damage to the mold.

3. Low shrinkage, which enables you to precisely cast your products without deformation.

4. Non-toxic, with FDA certificates.

 

Hardness(shore A):

When it comes to choosing proper hardness and viscosity, usually lower hardness and viscosity is recommended for casting of small-sized products with intricate features , and higher hardness and viscosity is recommended for casting of simple or big-sized products. Our product's hardness ranges from shore 10A to 50A to meet customers' different requirements.

 

Different colors: As some customers may need to make colored molds, we also have our own pigments to match with the silcone rubber. If need be, it will be our pleasure to sell you colored silicone rubber, or you may do the dying process by yourselves. Just choose the best way for you.

 

 

Viscosity:

The choosing of viscosity for silicone rubber mainly depends on whether you have a vacuum chamber for deaerating. The vacuum chamber is used to deaerate the mixed silicone rubber and dispel any bubbles out of the rubber.

 

1. With a vacuum chamber, you won't have a problem with high viscosity, for you can deaerate it easily.

 

2. Without a vacuum chamber, low viscosity is recommended. This is to prevent air from being entrapped in the rubber. Besides, we can prolong the curing time of the silicone rubber so as to leave enough time for it to give off the gas and bubbles before it entirely cures.

 

Free sample: Considering many customers' need of testing before purchasing, we usually offer 1kg of sample to you for trial free of charge.
Below is a general use guidance for our RTV silicone rubber:


 
TECHNICAL GUIDELINES:
1. Stir the liquid silicone (Part A and part B) well before use (except when depending on machine ).
2. Weigh the desired amount of part A into a clean mixing container, and then weigh the proper amount of part B into the container. Mix the two component together by stirring with a stick. Scrape the container walls and bottom well to insure a thorough mix.
3. Though it is often unnecessary to deaerate the material due to its low viscosity and our special formulation, it is better to do so to obtain a bubble free rubber. Place the container into a vacuum chamber and evacuate the entrapped air from the mixture using a vacuum pump capable of achieving 29 inches of mercury vacuum. The mixture will rise, crest and then collapse in the container. Interruption (bumping) of the vacuum may be necessary to prevent overflowing the container. Keep the mixture under full vacuum for 2-3 minutes.
4. Pour the deaired material slowly in a steady stream from one end of the mould so that the material flows evenly over the pattern. This should minimize entrapment of air bubbles under the flowing material. A ”ready” mold may be poured firstly over the pattern, which will also help reduce the possibility of entrapping air on the pattern and in the cured rubber. A mold release agent may be applied on the pattern first to improve release.
5. Allow the rubber to cure for 2-4 hours at 24C before removing the cured rubber mold from the pattern. Heat acceleration is recommended if necessary.

 

SHELF LIFE:
12 months from date of production when stored at 25°C in the original sealed packages.

 
PACKAGE:
Packed in 5kg/pail,  25kg/pail, 200kg/pail.

 
FIRST AID:
Inhalation: Remove source(s) of contamination and move victim to fresh air. Contact physician immediately.

Eye Contact: Flush eyes with plenty of water. If irritation persists, seek medical attention.
Skin Contact: In case of skin contact, wash thoroughly with soap and water; remove contaminated clothing and launder before reuse; seek medical attention if rash develops.
Ingestion: Do not induce vomiting unless instructed by a physician. Contact physician immediately.
After first aid, get appropriate in-plant, paramedic, or community medical support.

 

Plant & Packing:

 

 

Not exactly what you want? 1 request,multiple quotations Get Quotations Now >>
Guangzhou Conson Silicone Materials Co., Ltd. is a leading science and technology corporation, dedicated to the research, develop, manufacture and sale of silicone materials. We have complete research facilities and a high level R&D team, including over 10 engineers and two doctoral senior researchers. We also cooperate with many universities and scientific research institutes in researching and developing silicone materials. Furthermore, our sale and service team are professional, experienced ... View detail

Basic Information

Product/Service (We Sell): HID Silicone Material,Moulding Silicone Material  
Brands: CONSON  
Number of Employees: 51 - 100 People  

Trade & Market

Main Markets: North America
South America
Eastern Europe
Southeast Asia
Africa
Oceania
Mid East
Eastern Asia
Western Europe
Central America
Northern Europe
Southern Europe
South Asia
Domestic Market
Total Annual Sales Volume: US$2.5 Million - US$5 Million  
Export Percentage: 41% - 50%  

Factory Information

Factory Size (Sq.meters): 3,000-5,000 square meters  
Factory Location: Tangkou 236 Industrial Park, Tuanjie Village, Xinhua Town, Huadu District, Guangzhou City  
Number of Production Lines: 3  
Number of R&D Staff: 11 - 20 People  
Number of QC Staff: 5 - 10 People  

Supplier Assessment Report

Do you want to know more about this company before you make a deal? Request an Assessment Report.
Supplier Assessment Reports are detailed on-line reports about the supplier's capabilities. It helps you get all the information you need to trade confidently with suppliers.

Send your message to this supplier

Sourcing Products & Suppliers on Alibaba.com

Search Products
Enter the product you are looking for in the Search Bar and click Search
Contact Suppliers
Click Contact Now to send an inquiry or I’m online, Chat now to chat online
Check Messages
Check quotes & messages from suppliers in your email inbox or Message Center
China (Mainland) | Manufacturer, Trading Company | Contact Details
Experience: Established 2010

Communicate with Supplier:

Mr. Max Jin
Mr. Max Jin:
What can I do for you?
Not exactly what you want?
1 request,multiple quotations Get Quotations Now >>