160W AC-DC Single Output Desktop GS160 series Features: Universal AC input / Full range 3 pole AC inlet IEC320-C14 Built-in active PFC function, PF larger than 0.95 Protections: Short circuit / Over load / Over voltage / Over temperature Fully enclosed plastic case Approvals: UL / CUL / PSE / TUV / BSMI / CCC / CB / FCC / CE ClassⅠpower (with earth pin) LED indicator for power on No load power consumption less than 0.5W Erp step 2 compliant (level Five) NR Can compliant MEPS compliant Meet EISA 2007 (Energy Independence and Security Act) 2 years warranty SPECIFICATION
ORDER NO. GS160A24-R7B OUTPUT SAFETY MODEL NO. GS160A24 DC VOLTAGE 24V RATED CURRENT 6.67A CURRENT RANGE 0 ~6.67A RATED POWER (max.) 160W RIPPLE & NOISE (max.) Note.2 180mVp-p VOLTAGE TOLERANCE Note.3 ±3.0% LINE REGULATION Note.4 ±1.0% LOAD REGULATION ±3.0% SETUP, RISE TIME Note.6 2000ms, 20ms / 230VAC 2500ms, 20ms / 115VAC at full load HOLD UP TIME (Typ. ) 20ms / 230VAC 20ms / 115VAC at full load INPUT VOLTAGE RANGE Note.7 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95 / 230VAC PF>0.98 / 115VAC at full load EFFICIENCY (Typ.) 92.5% AC CURRENT 1.85A / 115VAC 1A / 230VAC INRUSH CURRENT (max.) 120A / 230VAC LEAKAGE CURRENT (max.) 0.75mA / 240VAC PROTECTION OVER LOAD 105 ~ 135% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed OVER VOLTAGE 105 ~ 135% rated output voltage Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE 90°C ±10°C (RTH2) detect on inside ambient temperature Protection type : Shut down o/p voltage, re-power on to recover ENVIRONMENT WORKING TEMP. -30 ~ +70°C (Refer to derating curve) WORKING HUMIDITY 20 ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -20 ~ +85°C , 10 ~ 95% RH TEMP. COEFFICIENT ±0.03%/°C (0 ~ 50°C) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY & EMC(Note. 5) SAFETY STANDARDS UL60950-1, TUV EN60950-1, BSMI CNS14336, CCC GB4943, J60950-1(except for 48V) approved WITHSTAND VOLTAGE I/P-O/P:3KVAC ISOLATION RESISTANCE I/P-O/P: 100M Ohms / 500VDC / 25°C / 70% RH EMC EMISSION Compliance to EN55022 class B, EN61000-3-2,3, FCC PART 15 / CISPR22 class B, CNS13438 class B, GB9254, GB17625.1 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A OTHERS MTBF 290.3K hrs min. MIL-HDBK-217F (25°C ) DIMENSION 175*72*35mm (L*W*H) PACKING 0.66Kg; 20pcs/ 14.2Kg/ 0.85CUFT CONNECTOR PLUG See page 2, Other type available by customer requested ; CABLE See page 2; Other type available by customer requested NOTE 1. All parameters are specified at 230VAC input, rated load, 25°C 70% RH ambient. 2. Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3. Tolerance: includes set up tolerance, line regulation, load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. Derating may be needed under low input voltages. Please check the derating curve for more details.