1. One component
2. Neutral Curing and non-corrosive to metal, coated glass, concrete and marble
Characteristics: 1. One component 2. Neutral Curing and non-corrosive to metal, coated glass, concrete and marble 3. Non - discoloring. 4. Excellent adhesion to cabinets, bathroom, glass, metal and plastic etc 5. Excellent resistance to low and high temperature, little performance changes between -20 °C~150 °C 6. Excellent resistance to weather, mildew and ultraviolet radiation 7. Odorless Application: 1. Joint sealing for cabinets and bathroom , vehicles, ships and house 2. Joint sealing for ceramic 3.Joint sealing for stainless steel 4 . Joint sealing for engineering of all kinds of Aluminum doors and windows 5 . Joint sealing for roof 6. Joint sealing for curtain walls 7. Use for many kinds of industry and building Limitations: 1. Cannot be used as structural sealant. 2. Not compatible with materials with grease or exudation. 3. Cannot be used for the continuous flooding or entire-year moist places. 4. Cannot be used on the substrate surface below 6°C or above 40 °C Curing Time: Track-free Time is between 25 to 30 minutes at room temperature Completely curing Time is between 48 hours to 96 hours at room temperature. Notices: 1. For best result, use opened cartridges on the same day. Otherwise store it strictly tightened 2. Pre-test is necessary to ensure the excellent adhesive property. 3. Avoid contacting with skin or eyes, in case of contacted, rinse immediately with plenty of water, go to hospital if necessary 4. Keep away from children before curing. 5. Avoid contaminating food, medicine or cosmetics. Color available: Black, white, grey Packaging Cartridge: 300 ml 24 cartridges/ctn Gross weight: 470 g Net weight: 410 g Storage and transportation: 12 months stored in a dry and ventilated place below 27 °C in original packaging. Non-dangerous, can be transported by train, automobile, ship.
Testing Standard: GB/T 14683-2003
No Item The standard Test result 1 Appearance Have no grain, no agglomerations, no skinning, and no bubble. Pass the standard 2 Density (g/cm 3) ±0.1 1.427 3 Droop degree ( mm ) Uprightness ≤3 0 Level No damage No damage 4 Skinning time ( h ) ≤3 0.5 5 Elastic recovery ratio ( % ) ≥80 95 6 Extrusion ability ( ml/min ) ≥80 124 7 Tensile modulus ( Mpa ) 23°C ≤ 0.6 0.63 8 Cold-hot adhesive No damage No damage 9 Under water adhesive No damage No damage 10 UV radiation No damage No damage 11 Definite Elongation No damage No damage