Tile cutting machine:
High cutting speed
Perfect cutting effect and high aaccuracy
Low cutting cost without electric&water.
Manual tile cutter
Manual ceramic tile cutter mainly applied in cutting various of Internal and external wall tiles, floor tiles, solid tiles, ceramic plates, glass ceramic tiles and glass, etc. Simple mechanical operation, environmental protection, clean, convenient, professional, accurate, high quality and efficient.Of course it becomes immediately object that a lots of customers pursued.
Manual ceramic tile cutter was more efficient and accurate than traditional cutting machine, it can reduce waste of materials, and could improve working Efficiency.
1. Finish your homework. The cutting speed is fast, a few seconds;
2.The cutting effect is good, high precision straight and smooth edge;
3. The cutting cost is low, a round knife can cut 50000 to 70000 meters;
Move scale and selected cutting size,with one hand holds the operatehandle,sliding seat puled to the back,tiles will be placed on the seat board,and aligning the cutting line of ceremic tile with the platebeam,tile front depend on bottom cut side.
The second step:scribing
Put down that knife handle wheel anda tile surface contact,will handle push forward the cutter wheel on the surface of tiles cut out of continousuniform straight line.
The third step:pressing
The operating handle is put down on thefront end of the ceramic tile,with proper force operating handle downward pressure,ceramic tile be disconnected along the line.
The fourth step:Cutting
Attention:The cutting marks were more thin and light, the tile edge would be more correct and fine. On the contrary, thick and dark cutting marks would be with bevel and ugly edge. So the pulling force should be light, in addition, the tile’s corner would be break if the cutting marks was interrupted.
How to use the Manual ceramic tile cutter safely?
1, Open the free foot, lock the nut.
2, Adjust the cutting size on the rule rod, lock the fixed screw rod by hand after confirmed.
3, Put the tile on the platform.
4, when starting to cut, first pull the pull-push rod to the end, then put the blades on tile lightly, push the blade to front slot along the main shaft, next put the foot on tile, flap the end of pull-push handle lightly, so the tile would break along the cutting marks.
Package and shipment
The best describe is comments from users:
Good comments from Ukrain:
Good comments from Russia:
Good comments from Canada:
Safety Sale Service:
Any questions about our products,please just email to me by missjoselyn at cslfjs.cn,Mobile:+86-15874942196 SKYPE:cslfjoselyn. I would quote the most favorable price for you.