maintenance free battery motorcycle parts 1. PRODUCT INFORMATION SPECIFICATION
Model YTX5L-BS Voltage(V) 12 Capacity(10Hr)(AH) 5 Dimensions (L x W x H/T.H)(mm) 113*70*105 Weight(KG) 1.38 MOQ 10
Component Raw material Positive plate Lead dioxide Negative plate Lead Container ABS Cover ABS Safety valve Si-Rubber Terminal Copper Separator AGM(Fiberglass) Electrolyte Sulfuric acid
2. FEATURES 1) Good start-up capability: It can output the high electric power instantly which brings the motorcycle superior starting effect. Motorcycle can start up in one touch.
2) Starting performance on the condition of low temperature: Unique alive materials species makes well starting-up on of motorcycle under condition of low temperature.
3) Lower resistance: Infinitesimal resistance interior material assures sufficient power output.
4) Lower self-discharging rate: Introduction of special fitted lead powder and lead-calcium alloy plate effectively lockup electricity power supply.
5) Security: Special configuration and equipment with good anti acid-mist and anti-explosion.
6) Long service life: Super anti-erosion material guarantees battery long service life.
3. APPLICATION AND MAINTENANCE: 1. E-bike
It’s Sealed Valve Regulated with none requirement to add extra water or maintenance when using 1) Excellent High-Rate Discharge Performance: Being propitious to start with high current 2) Recharging: when open circuit voltage is lower than 12.6V(12V series) or 6.3V(6V series) before using 3) Recharging Method: Charging 4-10 hours by 0.1C10 constant current Charging Voltage, when normal using,12.8V-14.5V(12V series) or 6.9-7.2V and Max Charging Current 0.4-0.5C10(A) 4) Application Temperature: -20-60°C 5) Not upside down when transporting, storing and using 6) Recharging: Offloading the battery to recharge when Motorcycle could not start well, poor lamp lighting and weak trumpet 7) Timely Recharging if long time no use. Normally, it’s 1-2months. 8) Storage place should be prevented from humidity, high temperature and avoid to keep in the place of corrosive gas and solvent.
5.FACTORY VIEW & CERTIFICATION