Kingjoin Windshield PU Sealant /Car Body PU Sealant / Construction PU Sealant / Structural PU Sealant
Detailed Product Description
Kingjoin Windshield PU Sealant /Polyurethane Sealant/ One Component PU Sealant is made with advanced technology, best formula and high quality ingredients,
it is single-component with features of good flexibility and elasticity, easy for construction, solvent-free, no shrinkage, and no corrosion to the surface material, strong intension and anti-aging. It is special for sealing windshield glazing, glass fiber reinforced plastic fittings, steel and aluminum plate installation in automotive industry
Suitable for automobile windshield and side glass installing.
Suitable for car body structural bonding and sealing.
Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.
* 310ml cartridge, 20 pcs/carton
* 600ml/400ml sausage, 20 pcs/carton
Minimum application temperature: 5°C.
Pu Sealant should be dispensed from either the cartridge or sausage by means of a caulking gun. Pierce the membrane at the top of the cartridge and screw on the nozzle. Cut nozzle to give the required angle and bead size. Place the cartridge in an applicator gun and squeeze the trigger. For sausages, a barrel gun is required, clip the end of the sausage and place in barrel gun. Screw end cap and nozzle on to barrel gun. Using the trigger extrude the sealant, to stop depress using the catch plate. Apply RENZ 10 in a continuous bead using enough pressure to properly apply the sealant.
* One-component formulation.
* Safe Drive Away Time in as little as two hours when used on vehicles with airbag.
* Modest Hardness after curing.
* Flexible, durable and excellent extrudability.
* Need no primer to glass.
* No sagging, no pollution and corrosion to base material and environment.
* Excellent sealing performance, excellent water and aging resistance.