|Place of Origin:||Henan China (Mainland)||Brand Name:||Shenwu||Model Number:||QS40-18-3|
|Theory:||Centrifugal Pump||Structure:||Single-stage Pump||Usage:||Water|
|Power:||Electric||Standard or Nonstandard:||Standard||Fuel:||Electric|
cast iron/stainless steel/nodular cast iron
|Motor power:||from 2.2kw~220kw||Winding wire:||100% copper wire||Motor style:||
three-phases squirrel cage asynchronous motor
|Full approvals:||Yes||Water PH:||6.5-8.5||Water temperature:||below 120degree|
|Color:||bule or as per request||Sediment:||under 0.01%||Hydrogen sulfide:||under 1.5mg/l|
|Packaging Detail:||Wooden package|
|Delivery Detail:||7-30days after payment confirmation|
portable electric water pump home depot
2.energy saving,high efficiency
3.low noise.long life
Portable electric water pump home depot
Lift scope within 5~12m;
Caliber scope 30~150mm,
Temperature range<=100° C.
Lift scope within 5~54m;
Caliber scope 51~152mm,
Temperature range<=100° C.
Lift scope within 5~600m;
Caliber scope 32~203mm,
Temperature range-15~100° C.
SQS, SQY, SQJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountains of diversion, in the low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Its characteristics are the electrical, water pumps and assembled into a simple structure, the installation of the demolition of convenience, small footprint, the use of simple maintenance, safe reliable operation, no water pollution and so on.
Product use conditions
QS (SQS) Bearing submersible pump use conditions
(1) Power: 50 Hz frequency and voltage of 380 volts (allowing deviations +5% -10%) of the three-phase AC power. Pumps should be safe submerged operations, diving depth of not less than 0.5 meters.
(2) Water: general corrosion without water, sand volume is not 0.02%, PH: 6.5 ~ 8.5 by extracting the water temperature no higher than 100 ° C.
(3) Before the use of motor cavity must fill water, no running water.
QY (SQY) Oil submersible pump use conditions
Submersible pumps submerged depth of not more than 5 m; Water temperature does not exceed 40 ° C; water sediment or water insoluble solid mark of the volume ratio of not more than 0.1%, particle size less than 0.2mm, no corrosion, water pH value of 6.5 ~ 8.5; If the general temperature of water; water; water; Lake.
QJ (SQJ) Deep well submersible pump use conditions
(1) 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
(2) Electrical cavity must fill water.
(3) The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
(4) Electrical from the bottom of the bottom of the well shall be not less than 3 m.
(5) The water temperature no higher than 100° C, QJR-temperature hot water pump up to 80 ° C.
(6) Water and sand content (by mass) of not more than 0.01%.
(7)Water PH 6.5-8.5.
(8) The hydrogen sulfide in water content is not more than 1.5 mg / L.
(9) Water should ensure continued operation of the pump needs.