Guangdong, China (Mainland), Guangdong, China (Mainland)
Hong Ye silicone rubber, Hong Ye silicone rubber
HY-E6 series silicone rubber
4% for free charged
addition 1:1 or 10:1
Packaging & Delivery
Circuit Board Potting Silicone Rubber package: 25kg/drum and 200kg/drum
within 3 days after your payment confirmed in our bank
HY-E6 Series Addition Cure Mold Making Silicone Rubber
HY-E610 is a kind of two part silicone rubber in addition cure or platinum cure type with mixing ratio of 1:1 or 10:1 . It can cure at room temperature as well as under heat . It’s a kind of food grade silicone and mainly used for mold making.
It is mainly used for making molds of concrete stone,GRC,polyurethane products ; wax, candle decoration ; rapid prototyping and tyre molds; chocolate,candy and similar products .
*An exceptional fluidity and good operability, easy to demold
*Good tensile and tear strength
*Outstanding bubble releasing
*Aging resistance ,high temperature resistance (200℃)
How to make mold
How to make mold?
Step 1: prepare the original molds
Prepare an perfect original mold and clean it totally before operation .
*Notes:Make sure your original molds and operation tool cleaned up totally to avoid uncure problem .
Step 2: Take 100 G partA and 100 G part B (Or 100 G part A and 10 G part B) and mix them evenly.
*Notes:Addition cure mold making silicon rubber is two part flowing liquid , Pls follow the step strictly:
1.Weigh the two part exactly by electronic weight..
If any part not in exactly weight , it may cause changing of hardness , or even cause uncure problem.
2.Mix part A and part B evenly.
Otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What’s more,
the finished molds will meet a short life. All of these will cause a waste of silicon rubber.
Step 3: Vacuum pumping Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
Step 4: Pouring casting or Brush operation *Notes:1. For simple pattern products we suggest use pouring operation way , which will be very easy to operate and demould. Pourable silicone require light viscosity which will be easy to flow smoothly and easy to de-air . 2.For delicate pattern products we suggest use brushing operation way , which can copy the pattern exactly . Brushable silicone require high viscosity which won’t be easy to flow away and easy to brush . 3. We suggest to set the silicone mold for another 12 hours after demould before put into large production .
What do you need to notice?
As addition cure silicone is a kind of platinum cure system ,which will be easy to cause uncure problem ,so
Kindly follow the tips below :
*Do not mixwith liquid condensation silicone rubber or even the tool which used for condensation silicone
*Do not mix with organic matter which contains N, S, P organics and ionic compound like Sn, As,Hg, Ph,
*Do not add any pigment or powder into the addition cure silicone rubber without any testing to prevent uncure problem
Twelve(12) months when stored underdry and cool place by original package under 25℃
Hong Ye Jie Technology Co.Ltd here, exporting liquid silicone rubber with good quality and low price. reliable manufacturer of 20 years.
1. What can we do for you?
Shenzhen Hong Ye Jie Technology Co.,Ltd. is the subsidiary corporation of Hong Ye Jie Group, It’s established in 2013, is a Science and technology corporation which is engaged in production, R & D, and sales for hundred series products like Unsaturated Resin, Polyurethane Resin (PU) and Epoxy Resin, Universal Unsaturated Resin, Glass Fiber Reinforced Plastic Resin, Polyurethane Elastomer, Transparent PU , PU Foam Resin, Epoxy Floor Paint, Epoxy Potting Glue, Glass Fiber, Glass Fiber Cloth, Glass Fiber Mat, Glass Fiber Yarn, RTV Silicone ,Rubber , Liquid Silicone Rubber, Silicone Oil, HTV Silicone etc.
2. How to choose our products correctly and our strength?