Description: Maydos JD2000 Epoxy Self-leveling Flooring System is two-component solvent-free epoxy paint. It has a niceappearance, dust-resistant, corrosion-resistant and easy to clean. The flooring system has good bonding with the solid base, good abrasion resistance and durability. Meanwhile, it has certain toughness, brittle-resistanceand the load of a certain weight. The compressive strength and impact resistance ability is excellent.
Advantages of The Finish (Topcoat): 1. The surface of the Self-leveling coat is as smooth as the mirror. 2. Seamless, non-dusty and easy to clean. 3. Solvent-free and environmental. 4. Close-grained surface has good corrosion-resistance to various chemicals. 5. Have a large range of colors for the customer’s reference.
Where to Use: It can be applied in the non-dusty and non-bacteria areas like pharmacy factory, hospital, Precision Machinery, electronic factory, etc. Configuration of The Flooring System:
Requirements for the base: 1. Concrete strength≥C25; 2. Flatness: the maximum fall head in 2M distance<3mm. 3. The first layer must have waterproof treatment.
Technical Data: Drying Time: Touch dry: 2 hours Hard dry: 2 days Compressive Strength (Mpa): 68 Impact resistance strength (Kg·cm): 65 Adhesive force grade: 1 Pencil Hardness (H): 3 Abrasion resistance(750g/1000r, g): ≤0.03 Resistance to engine oil, diesel oil for 60 days: no change. Resistance to 20% sulfuric acid for 20 days: no change Resistance to 20% Sodium hydroxide for 30 days: no change Resistance to toluene, ethanol for 60 days: no change Service Life: 8 years Shelf Life: 6 months
Application Procedure: 1. Substrate preparation: Cleaning up and polishing the surface to remove floating pulp. The surface must beclean, dry and leveled up. 2. Primer: Apply JD-D10 epoxy high-solid primer by roller. The primer must be even and exhaustive. Theprimer should be stirred evenly according to the mixing ratio, then applied directly. The quantity of the builderscan be decided as per the square meters of the area. Using roller and waiting for 8 hours to construct the nextprocess.Inspection standards for the primer: even film with certain brightness. 3. Putty: Fine grinding by 325# sand paper and ash removal, mixing JD-D10 with appropriate amorphous silicaand apply directly with drawknife. The quantity of the builders can be decided as per the square meters of the area. Waiting for 12 hours to construct the next process.Inspection standards for the putty: Non-sticky to hand, no softening, no nail print if scratching on the surface. 4. Sealer: Fine grinding and ash removal. Apply a layer of JD2000A as the sealer. 5. Finish: Apply JD2000A epoxy self-leveling finish, using the gear roller to defoam during application.Inspection standards for the putty: even film, no bubbling, uniform color and good scratch resistance.Maintenance: 5-7 days. Don’t use or wash by water and other chemicals.
Technical Data: JD-2000A JD-2000B Color Mix colors Light yellow or nearly colorless Special gravity 0.95±0.02 1.55±0.05 Mixing ratio JD2000A : JD2000B = 5:1 Using time 60 min. (15℃) 30 min. (25℃) 15 min. (35℃) Touching dry 48h (15℃) 24h (25℃) 12h (35℃) Hard dry 10 days (15℃) 7 days (25℃) 4 days (35℃) VOC content ≤2% (after mixing)
Application Instructions: Mixing: JD2000B may have small amount of sediment during storage. So it must be stirred evenly beforemixing. Pour JD2000A and JD2000B into the barrel according to the mixing ratio and stirred evenly. Don’tscrape the mixed paint inside or at the bottom of the barrel so as to avoid the uneven mixed phenomenon. Reference dosage: 0.8~1.5KG/sqm Film Thickness: 0.5~1.1mm Clean up of the tools: by KC-X-1 epoxy thinner Construction conditions: temperature ≥10 ℃; relative humidity ≥ 85%
Notes: 1. When the temperature rises or ingredients increases, the use of the corresponding time will shorten. 2. The application environment must be clean, dry and dustless. 3. The film may be dulling or floating if the relative humidity is above 80% during application and hardnessperiod.Health and safety information It contains certain chemicals which can cause skin irritation. Wear gloves, masks while handling the product,washing thoroughly after handling. Should skin contact occur, wash immediately with soap and water.During application and curing in closed rooms, adequate fresh air ventilation must be provided. Keep awayfrom open flames including welding.In case of accidental eye contact, wash with a large quantity of water and immediately seek medical advice.For detailed health, safety, environment recommendations, please consult and follow the instruction on theproduct material safety data sheet
Disclaimer The information given in this sheet is not intended to be exhaustive. Any person using the product without firstmaking further written enquiries as to the suitability for the intended purpose does so at his own risk and wecan accept no liability of the product for any loss or damage arising out of such use. The information containedproduct development. Product data are subject to change without notice and become void five years from thedate of issue.
Packaging & Shipping
5L(6.5KG), 2 tins in 1 carton, 1620 tins for one 20FT container
18L(22KG), no carton package, 1078 tins for one 20FT container 20L(24KG), no carton package, 924 tins for one 20FT container
We can send engineers and workers to local market to help you finish your project.
Welcome to Maydos
Guangdong Maydos Building Materials Co.,Ltd, founded in 1995, is located in Shunde district, Foshan, Guangdong provi
nce, only one hour's drive from Guangzhou, and after more than ten years' endeavour , it now becomes one of the top 10 chemical enterprises in China. Maydos is mainly specialized in manufacture of high quality Emulsion Paint, Wood Lacquer,Chloroprene Rubber Adhesive, SBS Adhesive, PU Adhesive, Hot-melt Glue, Emulsion Glue and Epoxy Floor Paint. So far, Maydos has won many honors for its products. Such as ISO14025 Ecolabelling certificate, ISO9001 and ISO14001 certificate and the certificate for product exempt from quality surveillance inspection. Based on company's robust development and great success in domestic market, Maydos launched its international business at the end of 2005. So far as it is concerned, it has exported its products to over 30 countries in Europe, Asia, Africa, Oceania and America and Maydos Brand is well accepted by the consumers of the local market. Its international sales revenues grow by 500% in 2007. As one of the leading chemical groups of China, we'd like to cooperate with customers from all over the world based on mutual-benefit basis. We always put "Customers First" in our mind and commit to provide high quality HPPP (Honest, Prompt, Precise, Professional) service to all reliable and esteemed international partners and clients.
Maydos has developed close cooperation and material supplying relationship with DuPont, Bayer, BASF, BYK, Rohm and Haas and SUZUKA, thanks to the premium quality, standardized service system and technological innovation, Maydos won a variety of honors and great customer satisfaction. Followings are parts of Maydos’s customer and winning tenders: 1. Shell Oil (China) Office Mansion (emulsion paint, all-purpose adhesive) 2. Guangzhou International Airport (emulsion paint) 3. Japanese Embassy, Beijing (emulsion paint) 4. HONDA Guangzhou Automobile Factory (emulsion paint) 5. Panasonic (insulating paint) 6. LG Electronics (insulating paint) 7. 2008 Beijing Olympic Games Cycling Stadium, Diving Stadium and Rhythmic Gymnastics Stadium (fireproof paint)
Since its inception, Maydos has donated more than USD1.3 million to the public welfare undertaking to provide help for the poverty-stricken mountainous areas children and disadvantaged social crowds.
Clean up Clean the application tools first with paper towels, then clean the tools with solvent before the paint hardens
Health and safety information It contains certain chemicals which can cause skin irritation. Wear gloves, masks while handling the product, washing thoroughly after handling. Should skin contact occur, wash immediately with soap and water. During application and curing in closed rooms, adequate fresh air ventilation must be provided. Keep away from open flames including welding. In case of accidental eye contact, wash with a large quantity of water and immediately seek medical advice. For detailed health, safety, environment recommendations, please consult and follow the instruction on the product material safety data sheet.
Disclaimer The information given in this sheet is not intended to be exhaustive. Any person using the product without first making further written enquiries as to the suitability for the intended purpose does so at his own risk and we can accept no liability of the product for any loss or damage arising out of such use. Product data are subject to change without notice and become void five years from the date of issue.
Note: The above information is given to the best of our knowledge based on laboratory tests and practical experience. However, since we cannot anticipate or control many conditions under which our products may be used, we can only guarantee the quality of the product itself. We reserve the right to alter the given information without prior notice.