ID-111 Windshield PU Sealant is manufactured in accordance with the ISO/TS 16949:2002.
ID-111 is commercial grade,high modulus sealant,excellent adhesion on glass and metal,it is most suitable for bonding windshield in the autmotive industry.
1.Windshield PU Sealant is used for automobile windshield and side glass installing.
2.Suitable for sealing in automotive,caravan,ship building and railway industry.
3.Used for sealing, seam sealing, simple bonding as well as for vibration reduction and sound deadening measures in crash body repair and car body construction.
Tensile strength( Mpa)
Elongation at break (%)
Volatile content (%)
Touch Dry time (min)
Curing speed (mm/24h)
Application temperature (ºC)
2.Safe Drive Away Time in as little as two hours when used on vehicles with airbag.
3.Modest Hardness after curing.
4.Flexible, durable and excellent extrudability.
5.Need no primer to glass.
6.No sagging, no pollution and corrosion to base material and environment.
7.Excellent sealing performance, excellent water and aging resistance.
Not recommended for continuous water immersion application.
Application temperature: 5°C to +45°C .
ID-111 should be dispensed from either the cartridge or sausage by means of a caulking gun. Pierce the membrane at the top of the cartridge and screw on the nozzle. Cut nozzle to give the required angle and bead size. Place the cartridge in an applicator gun and squeeze the trigger. For sausages, a barrel gun is required, clip the end of the sausage and place in barrel gun. Screw end cap and nozzle on to barrel gun. Using the trigger extrude the sealant, to stop depress using the catch plate. Apply ID-111 in a continuous bead using enough pressure to properly apply the sealant.
1.For common occasion,after claeaning out the surface with organic solvent,this product can be used directly.
2.Please construct by application instruction strictly,failure of stickiness may be caused by any operation disobeying construction techniques.
3.This product is innocuous after curing completely,but before set,please avoids contacting with eyes and skin.In case of eyes and skin contact,wash immediately and thoroughly with soap and water.See doctor immediately if it is serious.
Shenzhen i-Like Fine Chemical Co., Ltd, a family enterprise of I-Like Holdings Group, which was started in 1997, has been a leader in the design, manufacture and marketing of aerosol products and sealants. Our aerosol products include Spray Paints, Car Care Products, tyre care and repair, and industrial-purpose products. Our sealants include but not limited to polyurethane (PU) sealants, PU foam (expanding foam), silicone sealants, RTV Gasket Makers, and contact adhesives.