|Place of Origin:||
Shandong, China (Mainland)
|Main Raw Material:||
cement,sand,synthetic resin and special additives
|Highest Working Temperature:||
|Delivery Detail:||within 7 days when receiving prepayment|
1:High early strength and bond strength.
2:Reduce working procedures
3:excellent water retaining property
Solid concrete with Cement Base Ceramic Tile Glue
1.high bond strength,water-fast,frost resisting,thermostability.
2. Good aging resistence.
3.construction easily, high cost performance.
4.Easy to trowel with no vertical slip.
Flexible Porcelain Tile Adhesive may be used to fix tiles onto plasterboard, fiber cement sheeting,structural composition board or concrete, cement renders/screeds, brickwork, blockwork, old ceramic tiles.
Technical parameters :
|No.||items||standard request||test result||conclusion|
|1||Tensile bond strength||≥0.60 M Pa||0.88 M Pa||qualified|
|2||Ratio of compressive strength||≤3.0||2.8||qualified|
|3||strength||≥0.6 M Pa||1.08 M Pa||qualified|
|4||rating of temperature7d||≥0.5 M Pa||0.94 M Pa||qualified|
|5||water-fast 7d||≥0.50 M Pa||0.86 M Pa||qualified|
|6||resistence to freeze thawing||≥0.5 M Pa||0.69 M Pa||qualified|
|7||Linear contraction ratio||≤0.3%||0.22%||qualified|
It can be used in sticking general tile , ceramic tile,mosaic tile , small size natural dimension stone etc. on the concrete surface ,plaster base surface , on brick wall in outdoor and indoor
1.All the surface should be strong, dry, clean, no shake, oil stain, wax stain, concrete curing agent and other loose things.
2.If the surface is covered with paint, it should be hacked and at least exposed 80%.
3.New concrete surface should be cured for 28 days at least. Then pave tile.
4.New plaster base should be cured for 7 days at least. Then pave tile.
5. You can use industrial detergent or degreasing dirt agent to clean the old concrete or plaster surface. Then use high pressure tap to clean up. It can be paved tile after airing 24h.
6. Clean the residue of concrete surface, especially the residual mold release of the slant concrete surface.
7. Before construction, the surface need to be wetted, if the surface is water absorption strong or in high temperature,dry environment.
1.6mm*6mm notched scraper is suggested, when sticking small size tile.
2.10mm*10mm or 12mm*12mm notched scraper is suggested, when sticking big size tile.
3. Referent dosage of using different notched scraper:
the teeth depth of scraper
the dosage of tile mortar
Business Card :