1. One component
2. Fast Neutral Curing and non-corrosion to metal, marble
5. RTV silicone
HIGH ADHESION STAINLESS STEEL SEALANT (KC-541)
TECHNICAL DATA SHEET
- One component
2. Fast Neutral Curing and non-corrosive to metal, coated glass, concrete and marble
4. Excellent adhesion to stainless steel, cabinets, bathroom, glass, metal and plastic etc
5. Excellent resistance to low and high temperature, little performance changes between -20 °C~150 °C
6. Excellent resistance to weather and ultraviolet radiation
1.Joint sealing for stainless steel
2.Joint sealing for car, ship and tea etc
3.Joint sealing for stone curtain wall.
- Joint sealing for engineering
5. Joint sealing between stone and other materials like glass, metal, plastics etc
6. Other purpose
1. Cannot be used as structural sealant.
2. Not compatible with materials with grease or exudation.
3. The construction surface should be clean and dry.
4. Not applicable to the seal of the immersed, airtight, or comprising substrates like copper, brass and lead, and oil-exudation surfaces.
5. Cannot be used on the substrate surface below 6°C or above 40 °C
Track-free Time is between 25 to 30 minutes at room temperature
Completely curing Time is between 48 hours to 96 hours at room temperature.
1. For best result, use opened cartridges on the same day. Otherwise store it strictly tightened
2. Pre-test is necessary to ensure the excellent adhesive property.
3. Avoid contacting with skin or eyes, in case of contacted, rinse immediately with plenty of water, go to hospital if necessary
4. Keep away from children before curing.
5. Avoid contaminating food, medicine or cosmetics.
Cartridge: 300 ml 24 cartridges/ctn
Gross weight: 470 g Net weight: 410 g
Storage and transportation:
12 months stored in a dry and ventilated place below 27°C in original packaging.
Non-dangerous, can be transported by train, automobile, ship.
Have no grain, no agglomerations, no skinning, and no bubble.
Pass the standard
Elastic recovery ratio (%)
Under water adhesive