1,cold-application and resistance
3,guarantee for 15 years
DESCRIPTION: YG seal Self Adhesive membrane consists of a reflective aluminum foil coated with a thick layer of rubber modified bitumen protected by a tough, tear-resistant liner. The product is available in two finishes - bright aluminium or Black HDPE. A tropical grade is also available which offers improved high temperature performance.
Vehicle maintenance and repair, sealing around pipes and tanks, repairs to weatherproof enclosures, sealing over wood, concrete brick most metals and some plastics.
Flashing & Sealing to felt asphalt and bitumen surfaces, flashing of conservatories and porches, roof skirtings and parapet joints, sealing of rooflights, vents, pipes, and other openings, repair bandage for gutters and roofs, sealing glazing bars, cappings and protective coverings.
Store the rolls horizontally between +5 dg C and 25 dg C in dry conditions in original packaging. Shelf-life approximately 12 months.
Surfaces must be clean of dirt loose material, grease and oils. Rough or porous surfaces must first be treated with Webbseal Bitumen Primer.
Do not apply to very cold frosted surfaces. Trim the materials to the required length/shape allowing an overlap of at least 25 cm where the material is to be joined. On stepped flashing begin at the lowest level and work upwards. Warming the tape using gentle indirect heat will help the adhesion and make the tape more workable in cold temperatures. Ensure that there are no air pockets. Apply even pressure over the entire surface using a non-abrasive tool e.g. cloth or hand roller. Take care not to stretch or puncture the foil during application.
Do not expose to petrol, white spirit, paraffin and similar organic solvents which will dissolve the bitumen.
Do not use in permanently submerged joints.
Bitumen may cause staining on some substrates.
Check for compatibility with other sealants.
Do not use in joints subject to traffic.
Do not encase in cement.
The user is advised to conduct tests to determine the suitability of the product for the Intended application.
CHARACTERISTICS AND PROPERTIES:
Youguan Self-Adhesive Flashing tape
0.8mm to 4mm
Softening point dg C
Operating Temperature continuous dg C
-10 to + 70 (tropical grade -10 to +80)
Operating Temperature short periods dg C
-20 to + 90 dg C
Elongation at break %*
Tensile Strength N/cm*
Tear Resistance N**
Peel Adhesion N/cm**
*ASTM D1000 **ASTM D 1004
AVAILABILITY – STANDARD SIZES:
Standard Roll length 10 meters.
HEALTH & SAFETY
Uncured product may irritate the eyes, respiratory system and skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical attention. Use in well ventilated areas. Keep out of reach of children. Use gloves and protective clothing. Do not ingest. For more information, please refer to the appropriate Material Safety Data Sheet.
Whilst every care has been taken in the preparation of this information, no warranty is given or implied in connection with any recommendation or suggestion made herein. We reserve the right to modify specifications from time to time without prior notice. The user is advised to conduct his own tests in order to determine the suitability of the product for the intended purpose. All goods are supplied subject to Standard Conditions of Sale which are available upon request.
Weifang Boguan Waterproof Materials Co., Ltd. was founded in 2009, committed to the research of waterproofing systems. We have been acknowledged as a leading supplier of waterproof materials in the world.we produce all kinds of waterproof materials such self-adhesive membrane,Hatch cover tape,Flash tape/band. Torched APP/SBS waterproof memebrane.Polymer self-adhesive,roof underlayments,Polythene waterproof membrane,waterproof coating etc View detail