1.one component formulation
2.excellent sooth appearance
3.paintable and good vibration
4.none sag none pollution
windscreen sealant polyurethane adhesive white grey
Kastar116 made with advanced technology best formula and high quality ingredients it is single-component with features of good flexibility and elasticity easy for construction solvent-free no shrinkage and no corrosion to the surface material strong intension and anti-aging. It is special for sealing windshield glazing glass fiber reinforced plastic fittings steel and aluminum plate installation in automotive industry.
Specially used for windshield and side glass
Also use for auto glass and plastic accessories (car roof side body and car front)
For bonding between automobile fitting inside and outside
Clean before operation
Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust grease frost water dirt old sealants and any protective coating.
Dust and loose particles should be cleaned.
Direction of operation
Tool:Manual or pneumatic plunger caulking gun
Cut nozzle to give the required angle and bead size
Pierce the membrane at the top of the cartridge and screw on the nozzle
Place the cartridge in an applicator gun and squeeze the trigger with equal strength
Clip the end of the sausage and place in barrel gun
Screw end cap and nozzle on to barrel gun
Using the trigger extrude the sealant with equal strength
Attention of operation
Wear suitable protective clothing gloves and eye/face Protection.
After contact with skin wash immediately with plenty of water and soap.
In case of accident or if you feel unwell seek medical advice immediately
Keep in cool and ventilative place
Shelf life: 9 months
-To do the experiment in advance is the necessary condition to guarantee the excellent adhesiveness; -After being opened the cleaner must be used up in a day; or else it should be firmly sealed; -Avoid contact with skin and eyes; if carelessly please wash them with a large amount of water and see the doctor; -If the bonded part is heavy or needs moving use the auxiliary tool to fix the position during the solidifying time(pressure-sensitive adhesive tape locating block etc.); -The recommended use condition: temperature 15-35°C humidity 40%-80%RH; keep the working condition completely ventilated; -If you have any other problems please contact with us.
Kater Adhesives Industrial Co., Ltd is a group company specializing in the development, production and sale of silicone sealant, silicon sealant, acetic silicone sealant, acetoxy silicone sealant, acid silicone sealant, neutral silicone sealant, structural silicone sealant, rtv silicone sealant, glass silicone sealant;, weatherproof silicone sealant; polyurethane sealant, polyurethane spray foam, polyurethane pu foam, pu foam, pu foam sealant; polyurethane sealant, polyurethane adhesive ... View detail