Band Saw Blade & Wire Butt Welding Machine
Welding Process:
- The Saw Blades or Wire Ends to be joined should be cut straight, exactly at right angles and free from burrs on special shearing attachment (optional equipment)
- Welding Current, Upsetting Pressure and Upsetting Way are set according to the blade width
- The blade ends are rigidly clamped in special quick acting clamps provided on the machine
- By depressing the welding lever, the welding process begins
- The two ends are heated to forging temperatures in a few seconds and are then automatically forged (upset). The welding current switches off automatically
- The job is declamped and the weld completed
ANNEALING: The upsetting way switch lever is now turned to annealing and the job is clamped again with the extended jaw distance which comes in automatically on flipping the lever to annealing position.
- By pressing the annealing switch on which two heat positions are provided, the job is annealed in order to normalize the brittleness of the welded area.
Optional Equipment:
- Shearing Attachment: Special shears with arrangement for mounting on the front of the machine
- Grinding Attachment: Mounted on top of the machine for removal of welded flash
Specifications:
Model: BBW-325 BBW-535 WBW-15
Job Band Saw Blades Band Saw Blades Wires
Band Saw Blade Width (mm): 3 to 25 5 to 35 --
Welding Wire Dia. Range (mm):
Iron & Steel -- -- 0.8 - 5
Copper -- -- 1 - 3
Aluminium -- -- 1.5 - 3
Nominal Capacity (KVA) 3 5 3
Grinder (KVA): 0.12 0.12 0.12
Input Voltage: 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz
Max. Current (Amps): 13 18 13
Duty Cycle at Max. Rating: 2% 2% 2%
Net / Gross Weight (kgs.): 25 / 35 28 / 38 25 / 35
Dimensions (mm): 275 x 235 x 225 275 x 255 x 225 275 x 235 x 225
Band Saw Blade & Wire Butt Welding Machine
