| NAVIGATION SOUNDER: 1 |
Full color echogram across 10.4-inch daylight-viewing
TFT LCD screen with 3 selectable background colors.
Echoes are shown in up to 7 user-definable colors. Up to 4
echo dynamic ranges are also selectable depending on
bottom conditions.
Dual frequency operation covering 5 to 1000 meters of
depth in 8 range steps manually or automatically, with a
single keypress selecting high frequency (200, 135 or 100
kHz) or low frequency (50 kHz). Depth readout in fathoms
or feet is also available.
1kW (max.) transmit output with power level automatically
adjusted to suit the range selected. Manual override is also
possible in special situations where more power is needed for
shallow water soundings.
Shows LAT/LON and water temperature data in addition to
sounding data and associated date/time when appropriate
optional sensors are plugged in. These types of data are
automatically output via RS-232C and RS-422 ports for use
by ECDIS, VDR and other onboard electronics.
Up to 24 hours of sounding and other data are automatically
stored in non-volatile (flash) memory protected from power
outage/shutoff or system reset.
Stored data can be displayed graphically as well as digitally
in a special data history window accessible with a single
keypress, and can be uploaded to a PC for off-line
processing and analysis.
A graphics printer can be plugged into a devoted rear panel
connector to print out a monochrome hard copy of the
current echogram.
Echogram feed rate can be changed in 3 steps for extended
display period across the screen without affecting the
sounding rate.
An extensive alarm function audibly and visually warns the
navigator against decreasing depth, missing or weakening
bottom echo, power supply voltage drop and power outage.
Both AC and DC power supplies are built in, with automatic
switchover to DC power source in the event of AC power line
failure.
Complies with IMO Resolution MSC.74(69) and Wheel
Mark regulations.
NAVIGATION SOUNDER NAVIGATION SOUNDER
MAIN FEATURES:
Display Screen:10.4 inch 7-analog RGB-color TFT-LCD, VGA (640 480 pixels) Transducer Frequencies: 50 & 200 kHz (standard, single housing),
100 kHz (user-supplied, separate housings) or 135 kHz (user-supplied, single frequency).
Depth Ranges: 5, 10, 20, 40, 100, 200, 400, 1000m (2.5-500fathoms or 20-4000 feet)
Range Discrimination: 6.5 mm/m (20m range), 0.65 mm/m (200m range) Minimum Detectable Depth: 0.5m (200 kHz),1m (50, 135 kHz)
Transmit Power: Approx. 1kW RMS adjustable in 4 steps (1/1, 1/4, 1/25, 1/100) automatically for range in use or manually.Sounding Rate: 120 to 30/minute automatically selected for range in use. Accuracy: Better than ±0.5 meters (20m range), ±5m (200m range) Data
Storage: Up to 24 hours of data in non-volatile memory. Up to 10 minutes of full color echogram in temporary storage. Data Retrieval: Data of past
15 min., 1, 3, 6, 12 & 24 hours via history window.
Echogram Feed Rates: 1/1, 1/2, 1/4, 1/8, 1/16, freeze Echogram Presentation: 7 analog RGBcolors, depending on strength
Echo Dynamic Ranges: 3, 4, 5, and 6 dB Echogram Display Duration: Approx.20 minutes at fastest feed rate.Background Colors: Dark blue, black, and white Noise Reduction: 3 steps Alarms: Depth (shallow), missing bottom, voltage drop, power shutoff
(audible only). Alarm output available via open collector.
Dimensions & Weight: 366W 275H 110D mm (cabinet), 6.6 kg (with mounting bracket).Power Requirements: 110-220 VAC or 11 to 40 VDC, approx. 1.5A at 12V Ambient Temperature: -15 to +55°C, 95% RH (operating, without
condensation), -40°C (storage)
Compass Safe Distance: 1.2 meters Data I/O Interface: NMEA-0183 sentences via RS-232C and RS-422 ports,and 8-pin I/O DATA connector
Printer Output: Centronics parallel, for monochrome printers with ESC/P protocol Temperature Sensor: T-200
Fox reaches digital cinema deal!
Navigation Sounder
