ACL Staticide® presents a family of coatings that gives long-lasting protection and will not wash off with water as an anti-stat would. Topical anti-stats are biodegradable and need reapplication after a few weeks whereas Staticide® ESD Safety Shield provides dependable protection by allowing static to dissipate at a safe rate regardless of relative humidity and without reapplication. The advanced formulas are blended from durable polymer materials that are safe to use in ESD controlled environments where contamination is a concern. These single-coat systems are flexible enough for soft plastics like tubing, clamshell protective packaging, carrying trays and lids and they dry with a seethrough clarity that surpasses any ambient cure coating on the market.*
Easy to apply, Staticide® ESD Safety Shield can be brushed, dipp , sprayed and provides excellent adhesion to a variety of plastics without any special cure treatment. So defend your plastic parts, bins and shelving against static with Staticide® ESD Safety Shield because when it comes to static, ACL Staticide has you covered.
Features and Benefits
Static Dissipative - Provides a surface resistivity of 105 107 ohms/sq
Translucent - Perfect for viewing ports on machines
Durable - Doesnt chip or peel and is able to withstand normal handling without scratching
Adhesion - Bonds to a variety of plastics
Customize Special formulations available for lower resistance and complex plastics
No Contaminants - No silicone, No chlorides
Easy to Apply - No special equipment necessary
*Easy to Use 6300 has no special drying requirements
6400 requires a low temperature heat cure
Staticide ESD Safety Shield
Translucent Dissipative Coating for Static Protection
Product Code 6300S, 63001, 63005
Intended End Use To coat acrylic, polycarbonate, PET, PVC plastics for interior ESD applications
Product Code 6400S, 64001, 64005
Intended End Use To coat polypropylene and polyester plastics for interior ESD applications
COMPLIANCY
Static Decay Meets MIL B-81705 when tested in accordance with
Federal Test Standard 101B, Method 4046
Resistance Meets ANSI / ESDA S20.20 and IEC 61340-5-1
Regulated Chemicals Meets EU RoHS and China RoHS
PHYSICAL PROPERTIES
Resistivity 10E6-10E7 ohms per square*
Weight/Gallon Range 8.7-9.1 lbs
Coverage (foam brush) 1500 sq. ft. / gallon @ .5 mil dry (approx)
Coverage (flow coat) 600 sq. ft. / gallon @ 1.5 mil dry (approx)
VOC Range 1.18 lbs / liter
Freeze Thaw Cycle Do not Freeze
Contaminants No Chlorides, No Silicone
Abrasion Resistance Coating exhibits resistance to abrasion that is similar to or better than that observed on bare substrate
Solvent Resistance Coated panel was submerged in a 50/50 mix of isopropyl alcohol and
water for 30 minutes to no effect
Transparency 93 96% T measured by UV Spectra
Shelf Life Three months (retest older material prior to use)