Roof IT Sealer & Leak Repair,Building Coating

ECO ENVIRONMENTALLY FRIENDLY ROOF COATING

 ROOF-IT is Liquid Coating it  applies as Easy as Paint. It's High Impact Resistant - Our  Liquid Roof Coating   Seals and  Repairs Leaking Roofs - 

Available in Custom Colors!!

Actually change the color of your Roof overnight 

RESIDENTIAL - COMMERCIAL - INDUSTRIAL APPLICATIONS

Roof Liquid Coating for Asphalt Shingles  -  Metal  - Aluminum - Concrete- Wood -, Rubber - Tin - Tile - Tar Stones Flat Roofs Surfaces  

Roof-IT is easy to apply use a regular paint  Brush - Roller or Spray Gun

Simply clean with water

Roof-IT for  Shingle Roofs- 

Before your shingle roof starts to deteriorate and your shingles start cracking , peeling & wearing off  apply ROOF-IT .   Roof-IT   forms into a Rock hard finish. Resistant to moisture - waterproofing your Roof , salt, chemicals, high impacts, UV rays & extreme heat & cold temperatures. Flexible. 

Apply One coat for Shingles in good to Fair condition - Coating should last from 15 to 25 years.

Apply 2 coats in areas that are wearing out & where you have leaks. Roof -IT will Seal your roof from leaks & repair roof areas that you have a leak problem

Roof-IT for Metal -Concrete - Wood - Tar Stone Flat Roofs 

 Roof-IT has a Rust Inhibitor protecting  Metal Roofs from rust & corrosion & extreme temperatures. Roof-It will waterproof metal, concrete, wood , Tar/Stone Flat roofs . Roof-It will extend Life of the roof  Apply 2 coats for maximum results

Available in Custom Colors!!

Roof-IT SEALS - REINFORCES - REJUVENATES ROOFS  

 

 

PROPERTIES

• Roof-It is a Liquid Polymer Roof coating that  hardens into a ROCK-HARD finish.Applied as easy as paint.
• As a Roof Sealant it is Resistant to moisture, acid rain, extreme temperatures, high winds  heat, cold , ice storms, snow, small hail storms and high impacts
• Eco-friendly, Water Based, Non-Toxic, Non-Flammable, and Non-Corrosive.
• Acts as a Metal Roof Coating against anti-corrosion, wear and anti-rust.
• Fast Drying in warm temperatures.
• 100% Flexible
• Apply in temperatures over 50F
• Roof-It as a Roof-Sealant is Resistant to Salt,Oil,Chemicals and Acids
• Covers 100 Sq.Ft.( 1 Gal / 1 Coat)
• Comes in one or five gallon pails
• Custom Colors
• Roof-IT Roof Coating is Resistant to temperatures up to 570 degrees F
• Resistant to temperautres up to 60F degrees below zero

 

 

ADVANTAGES OF USE

• Roof-It is a Do it yourself Roof Sealer and Roof Repair Coating
• Roof Sealant on All Roofs - RV, Metal ,Wood, Concrete, Asphalt, All Shingles and Terra Cotta
• Easy Application. Brush. Roller Or Spray.
• ROOF - IT as a Roof Sealer & a Roof repair will also seal & fill cracked shingles, adding a Tough Impermeable Finish
• Roof-IT Roof Coating is resistant to very High Winds. Surface is Reinforced & protected
• Add years to your existing roof by applying ROOF - IT.
• Save thousands of dollars on a New metal, wood, asphalt shingle roof
• Our Roof Coating will not crack, flake or peel after heavy abuse -Sealing & repairing your roof for a long time.
• Available  comes in Smooth or anti-slip (GRIT) finish
• No Primer necessary!
• Fast Drying in warm to hot temperatures 5 to 15 minutes.
• SeaLs and  provides a beautiful appearance and finish

APPLICATION:

For Asphalt Shingles, Concrete, Terra Cotta, Asphalt and all Shingle Roofs

• Apply in temperatures above 50 degrees F
  Surface must be clean & dry
• Use paint brush roller or spray gun
• Mix 1/4 to 1/2 a gallon of water for every 5 gallon pail
• After the mixture -  1  gallon covers 100 square feet one coat
• 2 coats recommended for shingles wearing off  worn or Leaking Roof 
• Product dries fast in warm to hot temperatures 5 to 20 minutes

APPLICATION:

For Metal -, Concrete -  Wood - Tar/Stones Flat Roofs Roofs

• Apply in temperatures above 50 degrees F
• Surface must be clean & dry
• Use paint brush roller or spray gun
• No Primer Necessary
• Use sandpaper to rough up surface
• 1  gallon covers 120 square feet one coat
• Apply 2-3  coats recommended for maximum results.
• Product dries fast in warm to hot temperatures 5 to 20 minutes

Contact us for small sample of product.