This is another quality paint that is only available in Thailand. It has two types: The standard type or 2K System (2KS) that does not need baking, and the High Baking System (HBS). These paints had been tested and proven its quality. Satisfied customers are from the Middle East, Australia, US and Southeast Asia. These are mostly wheel rim and mags manufacturer and repair service companies.

There are two things that we want from paint: first is the shiny gloss that we achieve, and second is its long lasting life. We can give you both requirements.

Our paints produce a shiny gloss on the wheels as well as on other parts of the car wherever you may want to use them, and of course, we also have the quality and lasting protection that you are looking for.

One way of testing its quality (which has been tried and proven effective) is what we call the "cross-cut" method. After the applied paint has cured, either the conventional or baking system, you get a sharp blade and use it to draw a deep vertical line on the painted surface until you reach the metal base. You can draw several lines 1 mm apart. And then draw horizontal lines across the vertical lines 1 mm apart. Usually, paints start to fall off if this is done. This, however, does not happen with our paint. Another test is to tape the "cross-cut" section with a strong adhesive or duct tape and pull it back. Our quality paint remains intact with this test. This product is a first of its kind that our company has developed and many consumers all around the world are already enjoying its benefits.

So why dont you try it too and see the difference?