Car Paint

A-PLUS

Extra Polyester Filler ( Mastic ) ( Putty ) ( STUCK )

Description

A-PLUS polyester filler is a two component

chemical paste used for the filling of holes and

imperfections in surfaces such as steel and GRP.

A-PLUS has been specially formulated for the

professional user and combines good filling and

smooth spreading properties together with ease of

sanding.

Surface preparation

and instructions for

use

A-PLUS multifunction polyester filler can be used

on the following surfaces:-

Bare steel - degrease and abrade with P80 paper.

Original paint surfaces - degrease and abrade with

P180 paper..

Mixing ratio 100 parts by weight A-PLUS polyester filler,

2 parts by weight A-PLUS hardener for polyester filler.

The exact mixing ratio is not critical, although over or

under catalyzation may affect the gel time. Do not

greatly over catalyze the paste as this will not

significantly speed up the gel time and could lead to

bleed through and bleaching problems when

over-painting later.

Pot life Once mixed, 4 -5 mins. at 20ºC with 2% hardener.

Tools Mixing board, filler knife, plastic or rubber spatula.

Drying time Sandable after 20 mins. at 20ºC.

Over-painting A-PLUS polyester filler can be over-painted with

most paint systems.

A-PLUS for car paints

Egypt Shebn Elkom Menofea

               Free Zone

Mobile     0020101801041

T             0020482329356

F             0020482329357