Cummins Diesel Gennerator

Cummin Generator: MPC225225 (6CTAA8.3G2)standby Power Rating (50HZ) 226KVA-181KVA.Prime Power Rating: 205KVA-164KVA

No of cyls: 6L

Dimension: L=2623,W=1020,H=1685

Net weight (KG) =2018.

Otherwise, we are also exporting all kinds of Diesel Generators. For further, please contact with us!

GENERAL CONTENT:

Voltage: 208/120V, 380/220V, 416/240V, 440/254V. In accordance with ISO 8528.

Prime: Continuous running at variable load for unlimited periods with 10% overload available for 1 hour in any 12 hour period.     

All ratings are based on the following reference conditions:- Ambient temperature:27°C   - Altitude above sea level: 150 metres   - Relative humidity:  60%

A Single Source For All Power System Solutions    

DIESEL POWERED GENERATING SETS CUMMINS SERIES ENGINES

Standby Power (50Hz)       27.5 KVA  to 3325 KVA   Prime Power (50Hz)       25 KVA  to 3000 KVA

Single Source Responsibility:Design, manufacture and testing of complete generating set are all produced by a company as assembler 

International Integrity: Assurance and strength of a worldwide major corporation baking the product.

Global Service: 24 hour spares and service availability in 100 countries. 

Single source warranty:Total product guaranteed by assembler.

Packaged Self-Contained Units: Integrated unit with built-in anti-vibration system, control panel, starting system and provision for base fuel tank and other  accessories.

Cummins Engine:* Heavy duty 4 cycle water cooled engine; *Electronic or Mechanical governor control.

Cooling System:40°C cooling package (50°C option).

Alternator:* Brushless machine. * Eagle Group made alternator. * Close voltage regulation. * Rotor and exciter impregnated with oil and acid resisting resin. * Exceptional short circuit capability. * Low waveform distortion with non linear loads. * Permanent magnet exciter.

Ratings :Ambient temperature : Not over 40°C. Relative humidity : Not over 95%. Altitude : Below 1500m above sealevel.

Skid Base: Built-in anti-vibration system bonded rubber units as standard eliminates need for rubber mats or spring mountings.

Standard Control Panel System:* Microprocessor control. * Integrated governor and voltage  regulation systems. * Superior alternator and genset  protection system. * Accurate battery monitoring system. * Totally reliable and proven system. * Smart starting control system.

Optional Control Panel System:

Easy and multi functional with full automatic failure indicators, manual or automatic (optional) panels can be chosen. Control panels are mounted on the genset with rubber anti-vibration mountings. Standard production control panels have 3 ammeters, volt meter, hour meter, frequency meter, temperature, oil and charge lamp. Automatic units provide protection against over temperature, low oil pressure, start fault, overspeed and overload.

Generator Set Performance:

CEI 2-3. VDE 0530. BS 4999-5000. NFC 51-100-111 and 112. NEMA MG1-22, IEC 34. ISO 3046 and ISO 8528.

General:Complete set of operating and instruction manuals. Fabricated and welded steel chassis. Built-in anti-vibration mountings. Inteqral lifting points. Optionai sub-base fuel tank with eight hour capacity, Dual flexible fuel lines, dial type fuel gauge and drain bung.

Finish: Etch undercoated and finished in high gloss durable musell jade green. 

SPECIFICATIONS

GENERATOR SET PERFORMANCE

Voltage Regulation: Maintains voltage output to within ±1%. At any power factor between 0.8 lagging and unity. At any variations from No load to full load. At any variations from cold to hot. At speed droop variations up to 5%. 

Frequency Regulation:Generator Set OptionsIsochronous under varying loads from no load to 100% full load.

Random Frequency Variation: Will not exceed ±0.25-0.5% of its mean value for constant loads no load to full load.

Waveform:Total harmonic distortion open circuit voltage waveform in the order of 1.5%. three-phase balanced load in the order of 5%.

Telephone Influence Factor: TIF better than 50. THF to BS4999 part 40 better than 5%.  Alternator Insulation:Class H insulation. 

Radio Interference:In compliance with BS800 and VDE levels G and N. 

ENGINE:Cummins series 4-16 cylinder in-line or vee formation, direct injection, four-cycle diesel engines.

Type: Water cooled, Natural or turbocharged and aftercooled.

Construction:Four valves per cylinder, forged steel crankshaft and connecting rods, cast iron block, With replaceable wet liners.

Starting: 12 or 24 volt negative earth, Battery charging  alternator.

Fuel System:12 or 24 volt fail safe solenoid, dual spin-on paper element fuel filters, PT fule injection systems with integral electronic governor. Dual flexible fuel lines with connectors.

Filters:Dry element air filters with restriction indicator and spin-on paper element full flow and by pass lube oil filters. Spin on corrosion resistor filter.

Cooling:High ambient 40°C radiator as standard with 50°C ambient as option. Oil cooler. 

ALTERNATOR

Type:Brushless, single bearing, revolving field,  4 pole, drip proof, screen protected. 3 phase, 4 wire of 12 wire. Class H insulation. Enclosed to IP21 and IP23 (NEMA) standard. IC 01 cooling system. Fully interconnected damper winding. AC exciter and rotating rectifier unit. Epoxy coated stator winding. Rotor and exciter impregnated with tropical. Grade insulating oil and acid resisting. Polyester resin. Dynamically balanced rotor to BS5625 grade 12.5. Sealed for life bearings. Layer wound mechanically wedged rotor.

Exciter Permanent magnet exciter:Triple dipped in moisture, oil and acid resisting polyester varnish and coated with anti-tracking varnish. Sealed solid state automatic voltage regulator self-exciting, self-regulating.. Output windings with 2/3 pitch for improved harmonics and paralleling ability. Close coupled engine/alternator for perfect alignment.

Voltages: Standard alternators are equipped with a main winding with 12 or 4 terminals, star with neutral connection. Special voltages available on request. 

GENERATOR SET OPTIONS:

Engine: Electronic governor control.  Mechanical governor control.  Heavy duty air cleaner with safety element. 120 or 240 volt coolant heater (thermostatically controlled).  Low coolant level warning or shutdown.  Water separator.  Sump evacuation pump.  Exhaust gas temperature monitoring. Tool kit. 

Alternator:  Anti-condensation heater.  105°C rise alternator.

Exhaust System: Industrial-grade exhaust silencer.  Residential-grade exhaust silencer. Length of flexible exhaust pipe.  Bellows.

Fuel System: 8hr sub-base fuel tank and gauge.  Free-standing 50-3200 gal fuel tanks. High/low/shutdowns and warrings.  Electric fuel transfer.  Manual transfer pump.

Generator Set:  Main line circuit breaker.  Auxiliary contacts.  Shunt trip.  Disconnect switch.  Cable entrance box.  Battery charger, 5-20 amp.  Batteries lead acid or ni-cad.  Audible DC alarm (loose).  Export box packaging.