Plastic to Metal Transition Adapter

This adapter  provides a smooth transition from plastic to metal. While the threaded end screws to a steel pipe or a metallic pipe fitting, the plastic spigot at the other end may be welded to a polyethylene pipe using different types of electrofusion fittings as per DIN 8075. This fitting uses a combination of elastomeric seals and significant interferences to ensure a leak-free design. The joint, designed to be stronger than the polyethylene pipe, exceeds pullout requirements.

Materials of construction: Body and expansion sleeve: galvanized carbon steel; Plastic adapter: HDPE; O-Rings: NBR

Available Sizes - Ambest´s electrofusion transition adapters are available in standard pipe sizes from 1½ x 50mm to 4 x 110mm, as follows:

Male Thread

Electrofusion Transition Adapter Male 110 mm X 4" ------Code No ASM1104-C
Electrofusion Transition Adapter Male 90 mm X 3" -------Code No ASM903
Electrofusion Transition AdapterMale 63 mm X 2" --------Code No ASM632-C

Female Thread

Electrofusion Transition Adapter Female 63 mm X 2"----- Code No  ASH632-C
Electrofusion Transition Adapter Female 50mm X 1½" ----Code No ASH50112-C