General Description:
The  NVF-200LS/R  works  as  Ethernet  to/from  VDSL  subscriber-site  conversion
bridge.  The  NVF-200LS/R  uses  QAM-based  4-Band  VDSL  technologies.  Which
supports 5M/15M/25Mbps per port symmetrical bandwidth over phone wiring with
long driver capable up to 1.9/1.3/0.8Km (6333/4333/2666 feet).
 
The NVF-200R also works with NVF-800S & NVF-2400S VDSL IP DSLAM, together
to form a cost-effective solution for services such as remote lecturing, telemedicine,
video conferencing, Video-on-Demand (VoD), IP-TV, Internet access, and various
high-speed data applications.
 
The  front-panel  provides  LEDs  indication  of  system  and  interface  status.  The
built-in POTS/ISDN splitter allows a standard POTS phone or ISDN device to be
connected. Full or half-duplex mode of LAN operations is automatically sensed and
configured. VDSL link rates are configured by local IP DSLAMs over a fix-speed and
an auto-speed function.
 
Therefore, NVF-200LS/R supports fix-speed, auto-speed, plug & play operations on
the subscriber-site, and are part of an ideal solution for delivering cost-effective,
high-performance broadband/multimedia services to Multi-Dwelling Units (MDU)
and Multi-Tenant Units (MTU) environments such as hotels, campus, hospitals,
telecom and point-to-point applications..

Key Features & Benefits:
* Compliant with IEEE802.3 10BASE-T and IEEE802.3u 100BASE-TX standard
* Compliant with ETSI, ITU, ANSI standards
* Support auto speed and 25/15/5M fix mode selectable through DIP switch  
* Max  5M/5M  distance  up  to  1.9km(6333ft),  15M/15M  distance  up  to 1.3km(4333ft), and 25M/25M distance up to 800m(2666ft)
* Supports 1 * RJ-11 connector for Ethernet over VDSL
* Supports 1 * RJ-11 connector for telephone/PBX connection
* Supports 1 * RJ-45 port for 10/100Mbps Ethernet with Auto MDI/MDIX
* Supports 1* DIP Switch for speed selectable(NVF-200LS only)
* Supports long packet size up to 1536 bytes
* Supports POTS/ISDN voice pass and 4wires phone set pass through
* Voice and Data work on the same telephone line
* Spectral compatibility with xDSL, ISDN (2B1Q/4B3T)
* Supports flow control IEEE802.3x for Full Duplex, and back pressure for Half Duplex
* Supports Surge protection
* Provides Power LED and LED indication Link/Active Status for Ethernet port and Link/Speed for VDSL port
* Plug & Play, mini size and metal case for outdoor application
* EMI certified by CE, FCC Class B, and VCCI Class B
* Safety compliant : EN60950-1
* External Power Adapter:Input:AC 85~240 volts/50~60Hz.Output:DC 5V/1A

Product Specifications:
Standard:
IEEE802.3 and IEEE802.3u standard
Compliant with ETSI, ITU, ANSI standards
Interface:
1 * RJ-45 10/100Mbps Ethernet port
1 * RJ-11 connector for EoVDSL
1 * RJ-11 connector for telephone connection
1 * DIP Switch(NVF-200LS only)
Cable Connections:
RJ-45 (Ethernet): Category 3, 4, 5 UTP/STP
RJ-11 (EoVDSL): Twisted-Pair phone wire
LED indication:
Power
Link/Active Status for Ethernet port
Link/Speed for VDSL port
VDSL Frequency
Spectrum:
NVF-200LS Transmitter: 900 kHz ~ 3.9MHz  
Receiver: 4MHz & 7.9MHz 
NVF-200R Transmitter: 4MHz ~ 7.9MHz  
Receiver: 900 kHz ~ 3.9MHz
POTS/ISDN Pass Filter
Spectrum:
0 ~ 630kHz
Power Consumption:
NVF-200LS (LT): 5.4W / NVF-200R (NT): 6W
Operating Temperature:      -20°C ~ 70°C (-4°F ~ 158°F)
Storage Temperature:          -20°C ~ 70°C (-4°F ~ 158°F)
Humidity:
10 to 90% (non-condensing)
Dimensions:
95 x 110 x 24 mm (3.74" x 4.33" x 0.94)