Yamata FY5318-SM Lockstitch Sewing Machines 'Waking Foot'
with Servomotor, High torque, Clutchless Electronic Variable Speed Motor Replacement for Industrial Sewing Machine Clutch Motors

It is suited to sewing, for example, car & boats seats, general upholstery and leather articles, belts, canvas, tents, awnings, handbags, outdoor wear, camping goods,jeans,vinyl goods etc.
 
 
 
  
 

Sewing speed (spm) 1,350
Stitch length of between 1 to 8 mm (5-16 stitches per inch)
Needle bar stroke (mm) 35.0
Thread take-up stroke (mm) 61.3
Foot lifting clearance (1/4") By hand
By knee 1/2" - Sew material up 3/8" thick.
Needle DB x 1 #22
Rotating Large Hook Heavy duty.
Walkin Foot - Feeding action for dificult materials.
Stitch regular Dial type
Reverse sewing Lever type
Lubrication Automatic lubrication (Centrifugal impeller
pump system)
Return oil device Plunger pump system
Hook lubrication control Screw adjustment type
Machine table NL type (Bed measurements 475x178mm)
Machine Manufactured to the Highest Japanese Mitsubishi company standards.
*Interchangeable Presser Feet with Juki 141, Brother 797, Chandler 337, Nakajima 181L. Mitsubishi DY350, LY3300 and others.
The SMS400 consumes about 63% less energy and is 1/3 lighter than the average clutch motor. It does not generate any appreciable heat and has only 3 main moving parts, two ball bearings and the rotor.
The SMS400 acts just like a clutch motor but the difference is that you don't hear it running. It only runs when engaged and the maximum sewing speed can be adjusted to the speed you desire no matter how hard you depress your foot the treadle.

If you are tired of the constant hum of a clutch motor or need to replace a worn out motor, the Servo Motor is the answer! The SMS-400 is a 1/2 hp, 110 Volt or 220 Volt, Single Phase motor with super quiet operation and controllability.

The speed is adjustable by dial and the motor is reversible by switch. This high torque DC electronic servo direct drive sewing machine motor has no mechanical clutch or brake to wear or adjust. No lamp output.

It comes complete with sewing machine table and Electronic DC Servo Motor 1/2 H.P, 1 PHASE, 110 VOLT, 0 ~3300 RPM (Model SMS-400), everything (drawer, belt, tools and instruction manual) brand new, packed in sealed boxes and never been used before.Assembly required.Six month factory warranty.