THREE-PHASE SWITCH DISCONNECTOR WITH MANUAL EARTHING CLAMP

THREE-PHASE SWITCH DISCONNECTOR    WITH MANUAL EARTHING CLAMP

ALL separators in the range are activated manually by one or two drive mechanisms (AME). For mounting
About 15,014 traps on poles / SE8 recommend using the original components are delivered as an option.
APPLICATIONS
Pole separators are used to obtain a visible disconnect parts distribution network, passing through a
process of repairing, servicing and other works for which the line must be inactive.
The separator is used to provide a visible separation and ground sections of the distribution network.
.
RULES AND STANDARDS 
IEC 694, IEC 129
Insulation is consistent with the requirements of Grade I of contamination as defined in the standard
When used as a separator apparatus of the task domain of a limited range of parameters in which it works - see 
is also subject to standard   IEC 265-1

OPERATING CONDITIONS
Maximum ambient temperature + 40 ° C
Minimum ambient temperature - 33 ° C
100% relative air humidity
Maximum wind speed 34 m / s
Maximum air pressure 700 Pa
Thickness of layer
ice separator 20 mm (class 20)
Altitude up to 1000 m
When the separator is used
altitudes above 1000 m, the
will recalculate the nominal voltage
(Multiplied) by the factor
1500 m - 0.95
3000 m - 0.80
The degree of contamination in
according to SN 33 January 0405. Maintenance free
WARRANTY PERIOD
Separators 3 to 1 5-year warranty period.
Exceptions are cases of mechanical failure (vandalism, natural disaster), improper installation and use apparatus outside
specified parameters.
May arise during the warranty period light changes galvanized surface. They do not affect in any way splitter functionality.
The separator is a period of 40 years life