-Introduction-

In our life, transportation is a need for us. People are starting to have their own private 
vehicles, but lacking of time to take good care of their cars, simply because rush working 
hours and there's no enough space especially in the city.
Most of cars' owners would prefer the carwash company to take care of their cars and this 
happened increasingly from time to time.
Along with the increase in car production, automatic carwash machine already developed 
a high profile business.

-High Quality & Modern Function-

Use Human Machine Interface (HMI) making operation and maintenance more convenient 
and user friendly.

  System Fault Display
 
Auto detect system and sensors fault and provide fault solution screen on HMI, enable the operator can solve the problem by himself.
  System Test
 
We are able to test the washer by auto or manual function, also can test air control, water spray and dry blower system separatly.
  Car Wash Quantity
 
The PLC can record total and single day carwash quantity, also record each car type wash quantity as well. (Sedan, Taxi, Van and special type)
  The Control Panel System
 
Wire circuit clearly.
All external switches and solenoid valves via fuses to protect your control parts. Using Japanese MITSUBISHI PLC (Programmable Logical Controller) and electrical parts. Full 
using high quality sensors instead of traditional switch, reducing fault. All air control system 
using German BOSCH parts, making precise function. Independent control all equipment, 
we still could wash the car even if some parts broken. Wide rang car wash speed, we can 
adjust any time period and keep some carwash procedure.

-Planning & Strategy-

In order to have a smooth flow of business operation, we also provide all the services 
including planning and strategy for our client who has purchased our Automatic Tunnel 
Carwash Machine in the following order:
  Searching for suitable location
 
    We will assist our client to survey the location for setup the new center:
  A flat floor to enable a smooth outflow of water and make convience for car  
  enterance & exit.
 
  The area must be 10,000 square feet and it should be placed at roadside which  
  the main road is always used by car owners. The optimum number of the cars 
should be approximately 1,000 cars pass by the road within one-hour time.
 
  The area space must be large enough to enable cars to make U-turn.
 
  Setup the machinery
 
  After deciding the location of center, the floor must be flattened if required. We  
  will planning the landscape layout of the machine, and then continue setup the 
whole center.
 
  Management
 
  We will provide the short term training for the newly hired staffs by the client,  
  including machine maintenance and service, like control machine, vacuum, 
waxing, polishing, and engine wash.