1. Raw material:

Wood pellet can be made from sawdust, wood shavings, wood chips or wood logs,

any wood wastes.

2. Involved processes

Depending on the input product, which can be dry wood shavings, wet sawdust,

wood chip and etc. Directly before the pelleting press, a product with a granular

size of approx. 4 mm and a residual moisture content of approx. 15 % is required

The mainly processes are:

Wood crushing(if the raw material is not already granulated), material sifter,

drying(if the raw material contains too much moisture), pelletizing, cooling

and bagging. The whole process is highly aumatically controlled.

3. Production capactiy:

    1 metric ton per hour to 6 metric ton per hour are available.

4. Highlight of our equipment

**** Reliable continuous operation

**** Low energy consumption

**** Low maintaince cost

5. Basic needed for an inquiry:

1) Your raw material. (For example: awdust, wood chips, etc)

2) Moisture content of your raw material

3) Production capacity required for complete wood pellet mill