SBS CONTACT ADHESIVE

Appearance

Green clear viscous liquid without mechanical impurity

Initial Viscidity

0.72 Mpa

Shear strength

1.5 Mpa

Viscosity

Low (80~100 cps, very easy to use)

Density

Low(around 0.8kg / L)small amount of product can be spread to large area ( 2kg to spread 18 m²)

Solid content

38%-42%

Impact to environment

Environmental friendly

( benzene<0.1g/kg,Dissociative formaldehyde<0.05g/kg)

Open time

Around 15 minute-6 hours

Application

aluminum-plastic board, fire-proof polywood, three-polywood, log, wood,leather, foam etc.

Direction

1.         Clean two parts to be bonded first (clean out the dirt,water or surface thickening & thinning etc.) and stir the adhesive to get better result.

2.         Evenly brush or spay the adhesive to the two parts.

3.         Let dry (around 15 mins, depending on humidity, temperature in local place). When felt dry by finger, put the two parts together and press for a while to finish the work.

4.         The boards can be used only 10 minute after they are adhered.