Car Alarm System

How to program features by remote
1. Turn Ignition on and off once when disarmed, Keep press
override switch till 5 chirp. System report program with chirps.
2. Press and count with override switch to selection the number of
features, the system will responds the numbers with chirps /
flashing.
3. Now you can press lock button ( with one chirp / flashing ) or
unlock button ( with two chirp / flashing ) to select the feature
you want and same process to program next features with add
count by override switch. (See Feature Selection Table)
4.Turn ignition on to save new program and Exit

Override switch functions:
1. Emergency disarm (Unlock):
Turn ignition on and depress override
switch for 1 sec to disarm the system
in case loose the transmitter.
2. Override mode:
When the system disarmed turn
ignition on and press override switch
for 5 times, parking light flash 2 times,
LED steady on, start kill inhibit. When
ignition on depress override switch 5
times again to exit override mode.
3. Code learning:
Turn ignition on and keep pressing
override switch for 5 sec while
disarmed. It comes with 5 chirps,
LED steady on, means the system is
in code learning mode, press any
button on the first transmitter within 5
seconds, then with 1 chirps means
learning 1st transmitter success and
waiting for the second learning
transmitter, the system can learning
code up to 4 transmitters.

PS:
AUX2 action: Shock/Door trigger
by-pass until Door open and after
Door close. Or automatic-exit 15
sec. after AUX2 action if door didt
open.

Two button feature:
Button: Lock / Panic (1.5 sec) /
Sensor by pass ( Within 5 sec. After Unlock)
Button: Unlock (silence) / AUX.1 (0.75 sec)
AUX.2 (Within 5 sec. After Unlock)
Button+ : Lock / Unlock (silence)
Four button feature:
Button I: Lock / Panic (1.5 sec) /
Sensor by pass ( Within 5 sec. After Lock)
Button II: Unlock / AUX.1 (0.75 sec) /
AUX.2 ( Within 5 sec. After Unlock)
Button III: Lock / Unlock (silence)
Button IV: AUX.1 (0.75 sec)