Car Alarm

FUNCTION INTRODUCTION

1. Arm / Disarm.

2. Last door arming(programmable):

System armed 30 second after ignition off

and last door is closed.

3. Security re-arm: when disarmed and

without open the door after 30 seconds,

system will armed again.

4. Chirp defeat arm / disarm (silent arm).

5. Shock sensor built-in.

6. Car finder: press button for 2, Siren

sounds and parking light flash.

7. Panic: press button for 2 seconds to

make siren sound and parking light

flashing.

8. Ignition safety door lock.

9. 2 stage disarms: when the system alarm,

presses any key for stop siren sound then

press button again for disarm.

10. Remote Anti-car jack: when ignition on,

depress button for 2 second.

11. Arm condition memory: the system will

maintained arms or disarm situation after

power cut and on again.

12. Remote shock sensor by pass: this

feature just makes shock sensor disable.

13. Valet mode (keyless entry)

14. Smart chirp (Tamper memory): system will

warning with 4 extra chirp sound when

system disarms if the door has been opened.

15. Code learning.

16. Door sensor delay alert (prog.)

17. Air compressor central lock (prog.)

18. Parking lights relay build-in with two wires.

19. Zone by pass: the alarm system will stop

siren sounds after 5 minute if door keep

opening.

20. AUX1

21. AUX2

22. Anti-scanning.

23. Extra Ultrasonic motion detector input. (Or

single / dual stage sensor input.)

BUTTON: A. Arm / Disarm

B. Door lock / unlock while ignition on

C. Panic (Keep press 2'')

BUTTON: A. AUX1 (2CH)

B. Car finder (Keep press 2'' while armed)

BUTTON: A. Anti-car jacking (Keep press 2" while ignition on. Disarm by button )

BUTTON: A. Chirp defeat arm / disarm

B. AUX2 (3CH) (Keep press 2'' )

C. Shock sensor by pass (Keep press 2'', within 5 when arming.)

OVER-RIDE SWITCH:

1. When ignition on depress one time for reset system to disarm.

2. When ignition on, press 5 times for valet mode, then press 5 times again to back normal.

3. When ignition on, press 5 seconds for entering code learning mode.

CODE LEARNING:

Ignition on depress over-ride switch 10 second till siren chirps 5 times, LED on, Parking

light on, it means system now in code learning mode.

Press any button of 1st transmitter for learning, siren chirps twice, LED off and on,

means learning successful and waiting for 2nd new transmitter to learn.

Press any button of 2nd new transmitter, after LED is on for learning, siren chirps 3

times means learning successful and waiting for 3rd new transmitter to learn.

Same procedure for code learning maximum can up to 4 transmitters.

If without any transmitter signal send out for learning in 10 seconds, the system will

back to normal mode.

Every time learning new transmitter, original code (old transmitter) will be erased.