Solar Regulator

Solar Charge Controller

Fitting for the solar lighting system is automatically controlled below 60W (12V) or below 120W (24V) for both lighting and solar panel. It uses the newest patent products of ours.

I Function:

1, Preventing battery from over charging, over discharging and Reverse-Current during nights.

2, Controller will start up the lighting system in the evening automatically after sunset 15minutes.

3, Controller will shut down the lighting system according to the time setting or shut down the lighting system automatically after sunrise.

II Connection: 

Opening the top cover of the controller, connect the wire with terminal according to the drawing on the top cover of Controller.

1, Connect the +, Poles of battery to the relevant terminal of the controller (the third one and the fourth one from the left) firmly and correctly.

2, Connect the +, Poles of the solar panel to the relevant terminal of the controller (the first one and the second one) firmly and correctly.

3, Connect the +, - Poles of the load to the relevant terminal

of the controller ( the fifth one and the sixth one from the left) firmly

and correctly.

III Indicators:

1. One piece of Charge Indicator LED (mark: Charge). When it is bright, the battery is charged by the solar panel strongly. Flickeringly means floating charge, no light means stop charging.

2. One piece of Load Indicator LED (mark: Load). When it is bright, there is an output and the load is working, No light means there isnt the output and the load stop working.

Attention Items:

1. Before connection, please check and confirm the rated voltage of the solar panels, batteries and the loads carefully. These must be same rated voltage, all 12V or all 24V.

2. The rated current of the solar panels and the load must be less than the rated current of the con