Scale-borer : adopt a nanometer magnetic technic, break the water molecule chain, change the group water molecule to sole molecule, then softened water quality, scaling prevention, advance water activeness, enhances the static oxygen and oxygen content in the water , produces the magnetization water
bacteria resistant : Uses the AG nanometer sterilization tube, eliminates germ in the water effectively, make the water use safer
electricity prevent : Uses the extension water to enhance the resistance, avoid the electric shock harm accident, only 3 milliamperes after the resistance value by test,
this patented technology RD by the Zhejiang University water treatment and purification research institute
this is our company production , applied for the patent already .
The system of solar water heater relies on a natural Principle--"Thermosiphon". The key important point of these systems is that: the storage tank is always located higher than the collector.
As the sun's rays hit the all-glass evacuated solar collector tubes , the temperature of the water in the tubes rises making it less dense or lighter. and hot and lighter water naturally moves up to the top of collector and through the evacuated collector tube convert to the storage tank. This makes the colder and heavier water in water tank moves down to the bottom of the collector. that continuous displacement occurs naturally. So the users can get the hot water from the tank.
the system of solar water heater is an "Open Circuit" non-pressure system. By the air vent valve on the top of the storage cylinder and the over flow pipe in the bottom it maintains open to the air.
Materials:
Inner tank: Imported 304 2B food grade stainless steel. thickness is 0.5mm
Outer tank: imported nacre white armor plate or stainless steel
Insulating layer :50mm-60mm high pressure polyurethane foamed
Bracket: premium cold roll bracket stainless steel screw
Vacuum tube: 3.3high borosilicate glass
The vacuum tube of our solar water heater has the high absorption rate and low emission rate,
the absorption rate is 0.90-0.93 (AM1.5)
the emission rate is 0.05-0.075 (80±5)
vacuum tightness is P≤5.0*0.0001Pa
idle sunning property parameters is Y=220-260./KW
the average heat loss coefficient is Ult=0.6-0.7W(.)
It means the temperature in the water tank is range from 50 to 95.
Characteristic
1. Best angle of stand makes the heat efficiency is very high .
2. All of the inner tank is produced by high-frequency ring welding or argon arc welding, which is very durable; high density
3. The insulating layer made of high pressure polyurethane foamed
4. The water inlet or out let can be set up as your asked.
5. Intelligent controller or electrical heat element can be choosed for this system.according to your requirement.
6. Advanced technology ,which can dispose of scale ,bacteria and prevent electricity
7. environmental friendly
Chinalco wins green light for Rio purchase
See larger image: solar water heater
