SFP Optical transceiver module

Features

Dual data-rate of 1.25Gbps/1.0625Gbps operation;10km~30km transmission with SMF;

Standard serial ID information compatible with SFP MSA. 

SFP MSA package with duplex LC connector

With Spring-Latch for high density application

Very low EMI and excellent ESD protection

+3.3V single power supply

Operating case temperature:

Standard:0 to +70°C

Industrial: -40 to +85°C 

Compatible with IEEE 802.3z

Compatible with ANSI specifications for Fibre Channel

Compatible with Telcordia GR-468-CORE

Compatible with FCC 47 CFR Part 15, Class B

Compatible with FDA 21 CFR 1040.10 and 1040.11, Class I

RoHS compliance (Optional)

Description:

The SFP transceiver is high performance, cost effective module supporting dual data-rate of 1.25Gbps/1.0625Gbps and from 10km to 30 km transmission distance with SMF.

The transceiver consists of two sections: The transmitter section incorporates a FP laser. And the receiver section consists of a PIN photodiode integrated with a TIA.All modules satisfy class I laser safety requirements.

The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal(LOS) output is provided to indicate the loss of an input optical signal of receiver.

The standard serial ID information compatible with SFP MSA describes the transceivers capabilities,standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROM protocol. For further information, please refer to SFP MSA.

Supply difference power and distance transmitter.

Business Card

Wuhan Eastlake Incubating Management Service Co., Ltd. [CN]

Contact Details

Online Postings: Products , Selling Leads