Schematic diagram for technical parameters
|
Fall | Stationary | rail-mounted | Attached | Inside climbing | |||||
α=2 | 31 | 35 | 100 | 100 | ||||||
α=4 | 31 | 35 | 70 | 70 | ||||||
Max.hoisting weightt | 4 | |||||||||
Radiusm | Max.Radius(m) | 30 35 40 | ||||||||
Min.radius(m) | 1.7 | |||||||||
Hoisting Mechanism | Fall | α=2 | α=4 | |||||||
speed(m/min) | 35 | 70 | 17.5 | 35 | ||||||
Hoisting Weight(t) | 2 | 1 | 4 | 2 | ||||||
Power(kw) | 15JC=40% | |||||||||
Slewing mechanism | Slewing speed(m/min) | 0.6 | ||||||||
Power(kw) | 3.7 | |||||||||
Trolly travel mechanism | Slewing speed(m/min) | 25 | ||||||||
Power(kw) | 2.2 | |||||||||
rail-mounted mechanism | Slewing speed(m/min) | 19.6 | ||||||||
Power(kw) | 2×4 | |||||||||
Jacking mechanism | Slewing speed(m/min) |
| ||||||||
Power(kw) |
| |||||||||
Working pressure(Pa) |
| |||||||||
Total powerkw | 28.9Jacking mechanism not inclueded | |||||||||
Working | 2040 | |||||||||
Balance weight | Arm length(m) | Weight(t) | ||||||||
30 | 5.86 | |||||||||
35 | 6.64 | |||||||||
40 | 7.29 | |||||||||
Self weightt | Arm length(m) | 30 | 35 | 40 | ||||||
Stationary | 20 | 20.5 | 21 | |||||||
Rail-mountedfoundations not included | 21.5 | 22.3 | 22.9 | |||||||
Attached | 36.4 | 37.2 | 38.3 | |||||||
Inside cilmbing | 16.4 | 17.2 | 17.9 | |||||||
Tower Crane (QTZ40)
