Specification

1Wavelength :           810nm+/-10nm

2Output power :         500mW

3Operation voltage:      110V -240V/±50Hz

4Time set :              3 0minutes

5Sound and lamp signal : tone and music

6Operational mode :  Continue wave and pulse wave (10Hz)

7Hand-laser head size :  37×140mm

8Supply power size :     190×135×60mm

9Weight :               0.6kg

10Warranty :            one years

1Put the plug into electric socket of 110V-240V .

2Press the power button , red lamp and blue lamp on Handy probe is light.

3Press the green button on Handy probe, the laser works continuous wave.

4Press put down : Pulse wave

5Press up :  Continue wave

6The Buzzer will be interrupted tone tone when laser works.

7Operational Mode : Change mode button  to continuous and pulse .

1The apparatus output infrared laser , which should be avoid directly beating eyes . Directly beaming eyes by laser is absolutey forbidden .

2For protecting eyes , the laser beam can be stared only after putting the apparatus on the therapeutic position and be stop before putting off the apparatus on the therapeutic position .

3The laser output probe equipped with the optical system , so it should be moved gently to protect it form mechanical shock , falling of and should be kept from heat and damp .

4Flammable anaesthetic and oxidizable gas such as nitrous oxide and oxygen , must be avoid to use in course of treatment , as well as cotton wool that can be fired with oxygen by high temperature produced by this laser apparatus in normal use course.

5This therapeutic apparatus had debugged and tested before factory , please dont disassemble and assemble departments of the apparatus without permission. Please contact with manufacture or maintenance points for troubleshooting.