TD series Ethanol Recovery Tower

Features

The device adopts high effect ceramics wave filter.The body of distillation tower is made of stainless steel.In this way it can avoid the phenomenon of filter blocking caused by scrap iron and its life is prolonged.All parts that will contact ethanol in the device such as condensor,buffer tank,coolingsnake pipe are made of stainless steel in order to guarantee that the finished product ,ethanol is not polluted,Model T still may use disassembled U type heating pipe.When maintenance,it can be removed out of the still.So it is very convenient to clean the outer wall of heating pipe and the inner wall of still.

In Model TD ,the indirect heating still is omitted.The condensor adopts calandria heat exchanger.Of course the screw plate heat exchange and coil pipe cooler can also be provided as request.When adopting coil cooler,the buffer tank performance better.

Constitutes of device

Model T has five specifications.Each specification is equipped with distillation tower,distillation tank, condensation,buffer-tank,measure of specific gravity.Distillation tower of W200,T-300 is installed on the still directly and distillation tower of Model T-400,T-500,T-600 is installed with still separately.

Model TD has two specifications,each specification is equipped with distillation tower ,still,condusator,buff-tank,measurer of specific gravity.Other auxiliary equipment and meters and instuments such as measure tank,storage tank,pump,rotameter and tempetature indicator should be prepared by customer.Our factory can also provide through additional process or order instead of customer as request.

Technical Parameters