Desiccant Air Dryer

  Micro-thermal dryers adopt the technologies of two-tower pressure swing adsorption and micro-thermal >regeneration. The regeneration operation is to heat the decompresseddry air to a certain regeneration temperature and thus, the regeneration gas can get greater regeneration adsorption ability so as to lessen regeneration gas.

Work principles of the micro-thermal dryers are that one tower is drying by adsorption under the working pressure, while the other correspondent one draws off little compressed air from principal pipeline. And then processed by decompressing and heating this little compressed air, it is micro-thermally regenerated as regeneration gas. Through micro-thermal regeneration treatment, the total water residue in the desiccant is decreased significantly, which improves the processing capacity of the equipment.

Device features

The product consumes gas rate is about 6%, with energy-efficient features

Cut over the long cycle, integrated whole sets a good performance

Key components used and well-known brands, and ensure continuous and reliable operation of devices

Preventing the use of multiple protection to avoid burning heating components 

 Availability configuration

1Molecular sieve or double beds reactive alumina + molecular sieve

2Dew Point cut over model

3High Dew Point police, chain

4Double-heating temperature of chain

5And filters installed in the whole sets of

6LCD computer communications interface higher plane