LCD Digital Anemometer
AVM-715 Function:

ON/OFF, H/T, °F/°C, 10 Memories, Air Velocity Unit, AVG (Multipoint),
Air Flow Vlume Measurement, AVG/MAX/MIN Reading.



Features:

Instant Display of the air Velocity and temperature

Maximum , Minimum and average Value Calculation

Easy Air flow Volume calculation (CMF/CMM)

10 Memories Data Storage/Recalling/Clearing

Data HOLD/TEST function

Low Battery Indication

One Hour Auto Shut off function

AVM-715 SPECIFICATION:

• MEASUREMENT RANGE: -50°C ~ +70°C OR 58°F ~ +158°F
• RESOLUTION : ± 0.1° FOR WHOLE RANGE
• ACCURACY : ±0.5°C FOR 0°C ~ +50°C OR ±0.9°F FOR +32°F ~ +122°F, OTHERWISE ±1°C OR 1.8°
• F
• SENSING TIME: 1 SECOND
• BATTERY: 3 X 1.5 VOLTS AAA SIZE OR EQUIVALENT
• AIR VELOCITY MEASUREMENT :
• MEASUREMENT RANGE RESOLUTION
• 0.0 TO 45.0 m/s (METER PER SECOND) 0.1
• 0.0 TO 140.0 km/hr (KILOMETERS PER HOUR) 0.1
• 0.0 TO 100.0 mph (MILE PER HOUR) 0.1
• 0 TO 8800 ft/min (FEET PER MINUTE) 10
• 0.0 TO 88.0 knots (NAUTICAL MILES PER HOUR) 0.1
• ACCURACY: ±2% FOR ALL RANGE
• INSTALLATION:
• UNPACK THE ANEMOMETER WITH CARE.
• OPEN THE BATTERY DOOR. THEN INSTALL THREE 1.5 VOLTS AAA SIZE OR EQUIVALENT
• BATTERY INTO THE BATTERY COMPARTMENT. AND CLOSE THE BATTERY DOOR.
• REPLACE NEW BATTERY WHEN THE LOW BATTERY INDICATOR APPEARS ON THE SCREEN.
• OPERATION:
• ON/OFF
• Press ON/OFF FOR ON/OFF SWITCHING. FULL DISPLAY SHOWS FOR A WHILE. THE UPPER
• DISPLAY SHOWS THE VELOCITY (DEFAULT AS m/s) VELO SIGN APPEAR, WHILE THE LOWER
• DISPLAY SHOWS THE TEMPERATURE (DEFAULT AS °F) MEASURED.
• ONE HOUR AUTO SHUT OFF FUNCTION & CANCELLATION
• THIS PRODUCT WILL TURN OFF AUTOMATICALLY AFTER ONE HOUR.
• TO DISABLE THIS FUNCTION, PRESS ON/OFF AND H/T TOGETHER TO TURN ON THE UNIT
• EACH TIME. THE PRODUCT WILL KEEP WORKING UNTIL BEING SHUT OFF BY USERS.
• UNIT
• THE UNIT IS DEFAULT IN ft/min AS MEASUREMENT UNIT FOR AIR VELOCITY. USER CAN PRESS
• THIS BUTTON TO INTERCHANGE THE AIRFLOW VELOCITY UNIT AS THE FOLLOWING:
• ft/min > mph > m/s > km/hr > knots.
• HOLD/TEST
• PRESS THE BUTTON TO FREEZE THE READING FOR RECORDING (BOTH VELOCITY &
• TEMPERATURE), HOLD SIGN APPEARS.
• PRESS AGAIN THE UNIT WILL RESTORE TO REAL TIME MODE.
• °F/°C
• PRESS TO SWITCH THE READING BETWEEN °C AND °F AS TEMPERATURE UNIT.
• AVG/MAX/MIN READING FOR CONTINUE MOVING AVERAGE MEASUREMENT (SINGLE POINT)
• a) PRESS ONCE THE UNIT WILL SHOW THE CONTINUE MOVING AVERAGE MEASUREMENT OF
• VELOCITY (AVG), MAXIMUM MEASUREMENT (MAX) AND MINIMUM MEASUREMENT (MIN) AS
• FOLLOWING:
• AVG > MAX(BOTH TEMP & VELOCITY) > MIN(BOTH TEMP & VELOCITY) > REAL TIME READING
• b) RELEVANT SIGN APPEARS ON THE DISPLAY AND READING UPDATE PER SECONDS.
• c) TO CLEAR VALUE, PRESS AND HOLD THE KEY FOR 3 SECONDS, 2 SUCCESSIVE BEEPS
• SOUND IS
• GIVEN OUT.
• AVG (MULTI POINT)
• a) HOLD THE UNIT IN POSITION, PRESS THE HOLD BUTTON TO FREEZE THE READING (BOTH
• VELOCITY AND TEMPERATURE).
• b) THEN PRESS MEM BUTTON TO SAVE THE READING. (A SINGLE BEEP IS GIVEN OUT FOR
• EVERY SUCCESSFUL SAVING). MEM 1 DISPLAYS REPRESENTING ONE READING IS SAVED.
• c) REPEAT STEP (a) (b) TO SAVE ANOTHER READING, MEM 12 DISPLAYS REPRESENTING 2
• READINGS ARE SAVED.
• d) CONTINUE TO DO SO UP TO 10 SETS OF READING CAN BE SAVED.
• e) ONCE ALL MEASUREMENT HAVE BEEN SAVED, PRESS AVG (MULTI POINT) BUTTON, THE
• UNIT WILL DISPLAY THE AVERAGE AIR VELOCITY FROM MEMORY AND AVG SIGN APPEARS.
• MEM (MEMORY RECALLING)
• a) Press THE MEM BUTTON, ALL SAVED READING (BOTH TEMPERATURE & VELOCITY) WILL
• BE SHOWN, STARTING FROM THE 1ST READING (i.e. MEM 1) TO THE 10TH READING (i.e. MEM
• 10).
• b) PRESS AND HOLD THE MEM BUTTON FOR 3 SECONDS TO CLEAR ALL SAVED READINGS.
• AIR FLOW VOLUME MEASUREMENT
• (i) SINGLE POINT MEASUREMENT
• a) DETERMINE THE FREE AREA OF THE AIR SOURCE.
• b) PRESS AIR FLOW BUTTON FOR 3 SECONDS TO DEFINE FREE AREA, DISPLAYS SHOWS
• AREA SIGN AND FIRST DIGIT OF 1.111 sq feet FLASHES.
• c) PRESS HOLD BUTTON TO INCREASE NUMBER OF THE FLASHING DIGIT.
• d) PRESS AVG (MULTI POINT) BUTTON TO MOVE TO THE NEXT DIGIT.
• e) PRESS THE AIR FLOW BUTTON, THE DEFINED FREE AREA IS SAVED AND THE UNIT IS NOW
• READY TO MEASURE AIR FLOW (CFM) AND FLOW SIGN APPEARS. VALUE SHOWS ON THE
• UPPER DISPLAY.
• (i) AVERAGE FOR MULTI POINT MEASUREMENT
• PRESS AND HOLD THE AVG (MULTI POINT) BUTTON FOR 3 SECONDS TO CLEAR CURRENT
• AVERAGE READINGS IN THE VELOCITY/FPM MODE.
• a) REPEAT (a) TO (e) IN SECTION (G) TO DETERMINE ALL MULTI-POINT AVERAGE READING.
• b) PRESS AIR FLOW BUTTON FOR 3 SECONDS AND UNIT ENTERS TO THE FREE AREA
• SETTING.
• c) REPEAT STEP (a) TO (e) IN SECTION (Ii) TO DEFAULT FREE AREA SETTING.
• d) PRESS AIR FLOW BUTTON TO CONFIRM AND UNIT ENTERS TO THE CFM MODE. THE UNIT
• DISPLAY AVERAGE AIR FLOW READING AND NUMBER OF POINTS MEASURED. VALUE SHOWS
• ON THE UPPER DISPLAY.
• PRECAUTIONS
• REMOVE THE BATTERY FROM THE BATTERY COMPARTMENT IF THE ANEMOMETER WILL NOT
• BE USED FOR LONG DURATION OF TIME OR DURING STORAGE.
• THE THERMOMETER CANNOT BE USED OR PUT INSIDE ANY OVEN OR MICROWAVE.