Heat stenter setting machine

Application

 This machine is designed for tentering and heat setting processes of synthetic fabrics and its blend fabric's etc.Suitable fabric weight is 80-360 g/m².

Main Specifications
* Nominal width series (W):1800mm, 2200mm, 2800mm,3000mm
* Machine hand: Right hand or left hand
* Machine speed: 10-100m/min
* Heat source: Circulating heat oil
* Hot-air chamber working temperature: 160-220 temperature controlled automatically
* Width adjust: 700-(W-50) mm
* Type of fabric entry:Horizontal pin or clip system.
* Type of fabric delivery: Plaiting or winding device.
* Drive: AC. motor driving, inverter controller speed synchronous system.
* Overfeed value: -10%~30%
* Installed power: Approx. 120kw
* Hot-air chamber overall dimensions (L.W.H):(690+2910×N)×(2200+W)×1700.
N----Number of chamber.
* Overall dimensions of the machine (L.W.H):(14485+2910×N)×(2500+W)×3200
* Weight: Approx. 40t

Main character
* The hot-air chamber is the type of bricks with small circulation type. Each chamber brick have temperature controller.
* The circulating fan is a axial type, the jet box has wedge section and holes on it's surface.
* The circulating fan can be pulled out of the chamber door for machine maintenance easily.
* The tenter rail adopt cast iron structure, on the rail working surface there is graphite gliding
strips. The tenter chain rollers are no lubrication oil injection when using.
* The machine adopt infra-red edge sensor, the fabric can be moved straightly.
* The machine will equip padder and weft-straightener when customer selection.