Product Overview

Terminal air dryer is a new generation compressed air-treating unit. Compared to main-pipe dryer, their difference is: terminal air dryer is mainly used as terminal device to supply gas, main-pipe dryer is installed in the front-end main-pipe after air compressor.

It is economic to use main-pipe dryer when the whole air system needs the same dried compressed air. If only part of the system needs dried compressed air, it should use our terminal air dryer. Terminal air dryer can avoid or reduce the increasing rate of moisture content in terminal compressed air which caused by the parametrical fluctuation in main pipeline system such as pressure, temperature, humidity and machine utilization.

 As for terminal device, its gas consumption is relatively small. Small capacity dryer is large and costly If manufactured by using refrigerant compressor system. Kelinaiers terminal air dryer adopt Patent Technology that can fully cool the vapor in the compressed air to form liquid water in smaller volume. So, it has high cost performance and compact structure.

 Our terminal air dryer is very suitable for corollary equipment to treat gas source. It can be tested with the main equipment together at the factory, and it can save the transportation cost of the equipment. Largely raise the product value only at a small cost that can be made up from lowering the service cost.

Our dryer has no mechanical failure, because it dont use refrigerant, wont have problems with freeze-up, dirty clog etc. that often be caused by using refrigerant compressor system.

Working Principle

KL series Mini Terminal Air Dryer through the principle of heat-conducting medium run from high potential to low potential to achieve refrigerant effect. Though steps of cooling separating draining to achieve drying purpose.

 Range of application

Kelinaiers terminal air dryer can totally replace the traditional air dryer for enterprise and department that only own small air compressor or part of its air system need dried compressed air. Because as far as air compressor below 7.5KW concerned, the traditional air dryer is low cost performance. In parochial working place, size must be taken into account. In the market, the traditional small air dryer is expensive and bulky which only be suited to users with enough budget and space. But for the low profit manufacturing industry, luxury is of out of date, only Kelinaiers terminal air dryer is the best choice for all small capacity user.

Main features  

1. Our heat exchanger is different from coil finned heat exchanger that generally adopted. It can fully cool the air in a smaller cubage in order to lower the vapor content in the compressed air. Pressure dew point below 10°C.

2. Compact size.

3. Flexible installation. Can be installed in main equipment or on the wall close to terminal as a gas appliances or corollary equipment for air compressor.

5. High reliability. No need refrigerant. The fan is the only rotary part. Low maintenance cost.

6. Particular continual drainer. Utilize capillarity to drain continually. Not only

7.Low noise.

8.Low price.

Parameters

Working  Pressure      4-10 bar

  Ambient  temp         40°C

      Inlet emp              45°C

      Pressure Dew point     2-10°C

      Voltage               220V/50HZ

Specifications