IR Transmitter
The TC-Z902V/Z904V/Z906V infrared transmitter is a microprocessor based central unit which is designed to modulate and transmit 2/4/6 sound channels to different carrier frequencies. It features built-in IR test diodes for audio monitoring and testing of receivers, independent channel volume control, independent channel output level indicators, and independent channel audio output for sound recording. Test mode produces a different frequency tone for each input/channel. Two BNC sockets can link up infrared radiators in two lines. Multiple interpreter consoles can be connected to the transmitter in a daisy chain.
| Modulation mode: FM Frequency synthesis: digital PLL Frequency band: 2.0 - 6.0MHz Frequency response: 100-14kHz Frequency stability: 10ppm Pre-emphasis: 75 μSec. Peak deviation: ±7.5kHz Distortion at 1 kHz: <0.5% Channel separation: >70dB RF output power level: 700mV | RF output impedance: 55-75 ohms Input impedance: 18k ohms Max. input power level: 7.5V AGC range: 30dB S/N ratio: >75dB Power consumption: 40W Powe requirement: 110/240VAC, 50-60Hz 19" rack mountable case Dimension: 430×99×325 mm (W×H×D) |
IR Radiator
The TC-H15 high-power infrared radiator can be switchable to 50% low power, making it suitable for use in larger halls and smaller rooms. The radiators integrated power supply unit is automatically switched on and off by the carrier signals from the transmitter by means of an high frequency sensor. The radiator is equipped with automatic gain control to ensure the infrared diodes function with maximum efficiency, and is naturally convection cooled for totally silent and maintenance-free continuous operation. It can be ceiling or wall mounted for permanent installation, or set up on an optional tripod for portable application.Multiple radiators can easily be daisy-chained together to expand coverage. The unit is easy to maintain and clean, with IR emitting diodes protected by the cover plate.
| Frequency band: 2.0 - 6.0 MHz IR output power: 15W Switchable output level: Low/High Coverage range: up to 30 meters Angle of half intensity: ±22° RF output impedance: 55-75 ohms | RF input voltage: 100-2000mV Power consumption: 55W, Stand-by 8W Power Supply: 110/240VAC, 50-60Hz Operating temperature: 0-40 Cable: 75Ω-4 coax, BNC connectors Dimensions: 450×211×82 mm |
IR Receiver
The portable TC-J902/J904/J906 infrared receiver is designed to receive 2/4/6 audio channels. The optical lens offers a wider receiving angle to pick up the infrared light signal. The delegate may listen to any selected language on a headphone/earphone. Volume level can be adjusted through the volume control for comfortable listening. Any number of receivers can be used within the radiator's effective coverage range.
| Modulation mode: FM Frequency synthesis: digital PLL Frequency band: 2.0 - 6.0MHz Frequency response: 100-14kHz De-emphasis: 75 μSec. Peak deviation: ±7.5kHz Distortion at 1 kHz: <1% S/N ratio: >55dB | Frequency stability: 10ppm Operating voltage: 2.3V-3.6V Power consumption: 50mW Slide switch for channel selection Switch for power on/off & volume control 3.5mm earphone output jack Battery type: 2 x AAA alkaline or rechargeable Pocket clip and lanyard for easy-wearing Dimensions: 140×58×30 mm (HxWxD) |
Interpreter Console
The TC-F06 interpreter console is a digitally-controlled workstation allowing two interpreters to work in turn.
Designed to be used for 6-channel simultaneous interpretation Gooseneck microphone and headset microphone can be used
Built-in loudspeaker with volume level control
LCD screen for specific information display
3.5mm jacks on both sides for MIC input and headphone/recording output
3 incoming languages can be preset, with pre-select A/B/C keys.
Automatic channel interlocking prevents interpreters from using same outgoing channel
Relay interpretation allows the interpreters to work from an active channel other than the floor
MUTE key to enable a brief muting of the microphone for cough cut
SLOW key to alert the current speaker to speak slowly
Loudspeaker is automatically switched off when MIC is on or headset is used
The floor signal automatically goes to the output channel after the microphone is turned off
Multiple interpreter consoles can be connected in a daisy-chain
Designed to comply with all related international standards & requirements.
Frequency response: 50-18kHz Distortion at 1 kHz: < 0.1% Channel separation: > 85 dB Signal-to-noise ratio: > 90 dB Max. input power level: 7.5V Operating voltage: 24V Power consumption: 2.5W | 8Ω/2W built-in loudspeaker Operating temperature: 0-50 Standard mic stem length: 425 mm 128x64 backlit LCD screen 3/5/10m cable with DB25 connectors 3.5mm jacks for mic, headphone, recorder ABS base: 247 X 145 X 95mm |