| 6000S Surface Acoustic Wave (SAW) Touchscreen Serial Controller Specification: |
Environmental Conditions | | Operating Range0°C ~ 65°C
Storage Range-25°C ~ 85°C | Humidity | Operating Range10%~90% RH (no dew falls)
Storage Range10%~90% RH (no dew falls) | Altitude | Operating Altitude10,000 feet (3048m) | Shock and Vibration | Three axis sine wave, 50 Hz to 2kHz, 1G, 2 minutes / Octave with dwell on resonances. | Flammability | The PCB substrate and all plastic components, such as headers and connectors are rated UL 94 V0. |
|
|
| |
|
Electrical Characteristics | | +5VDC (+4.75V to +5.25V) | Supply Curren | 85 mA, typical at +5V DC
Max . current : 150mA | Electrostatic Protection | Per EN 61000-4-2, 1995 : Meets Level 4
(15 kV air / 8 kV contact discharges) | Interface | Serial RS-232. 8 Data Bits, 1 Stop Bit, No Parity, Full Duplex
Hardware handshaking : RTS / CTS | Baud Rate | 9600 | Touch Resolution | 4096 x 4096, size independent | Conversion Time | Approximately 15ms per coordinates set | Reliability | MTBF greater than 300,000 hours
per MIL-HDBK-217-F2 using the part stress calculation method for ground benign environment with an ambient temperature of 25°C |
|
| |
Mechanical Characteristics | | Fourlayer surface-mount design with internal ground plane for EMI suppression. | Dimensions | PCB87 x 56 x 12mm
Refer to 6000S Drawing | Standard Cables | Standard external RS-232 cable connecting the SAW serial controller with the computer serial port : | Connectors Serial | connector P2
1X5,2.0mm 5 Pin Female Type connector on board for connection with RS-232 port. | Touchscreen | connector : P4
A dual row by six position header with 0.635 mm square pins
spaced on 2.54 centers for connection with touch panel. |
|
See larger image: Touch Screen SAW Controller Card
