Mirco Air Grinder(MAG-123N) /Air Tools

Technical parameter:

Max.Free Speed : 23,500RPM

Collet Size: 3MM(1/8")

Angle: 120°

Air Pressure Supply: 0.6MPA

Size:50mm*17mm*123mm

The Amout Of Air Consumption:120NL/min

Weight: 14oG

Package of tools:

1)MAG-123N:one piece;          2)adhesive sandpaper:eight pieces;

3)sub-tie-in:one piece;             4)over hose:0.4meter;

5)air hose: 1.2 meter;              6)hose band:two pieces;

7)cup wheel: two pieces;         8)spanner:one piece;

9)rubber disc holder:one piece

The characters and application of products
      Yuetai Air Rotary Grinders adopts precision and durable components. It has many specialties as follows: light and pen shaped design, small volume, high speed of rotation, low noise, large torque, low consumption of gas, light and stable. And its operation is very easy, convenient and fast, which is applied in varieties moulds, hardware products, glass, crafts, accessories, circuit board extensively such as shoe mould, wheel mould, pen mould, household mould, etc.  In a word, it applies in what need to be grinded, rubbed, carved and mirror polished.

Maintenance of tools
1.Frequently add oil to tools(pneumatic oil or decatizing oil).
2.  Air compressor should be installed oil-water separator, and we need always clean its sewage.
3.Special attention :Its fever heat is normal when the tool operate without any load. Otherwise, operation with load will get cooling gradually.
4.Ask professional staff to maintain the tools.

4.Ask professional staff to maintain the tools