TECMETAL SF-1D-SN is a maintenance free bearing material which consists of three layers: steel backing, bronze layer and sliding layer. A 0.2 to 0.35 mm thick porous bronze layer tin bronze(lead free) is sintered onto the steel backing. In a rolling operation the pores of the
bronze are completely filled with 1D-PTFE mixture, polytetra- fluoroethylene (PTFE) and 1D FILLER. On top of the bronze layer there is a 0.01 to 0.03 mm thick sliding layer of polytetrafluoroethylene (PTFE) and 1D FILLER(Lead free). The steel backing and the sintered bronze skeleton give a very high compressive strength and provide good thermal conductivity for bearings manufactured from the TECMETAL SF-1D-SN MATERIAL. The outer diameter surface and joint of the plain bearings are coated with a tin flash for protection against corrosion.1D PTFE filler is the pre-embedded lubricant. It could be used where the oil is hard to be added. It is maintenance free and has long service life.

Price list for reference:

We have full range(6~300mm inner diameter) standard size price list. Please feel free to contact us for the detailed price list. The price list is useful for you to make determination.

Terms and Conditions:

1. Incoterm: FOB Shanghai, Price in USD, rate: 1USD = 6.80RMB + 5%
2. Packing: Pieces in one bag or in one roll, then put in neuter carton, Marks on carton as arrange. 5% excess loading allowed. Then  make pallet if necessary.
3. Payment: 100% T/T in advance for order less than USD2000. Otherwise 30% T/T for deposit, balance 70% by T/T at sight of B/L copy or 100% L/C at sight.
4. Delivery: Usually the delivery is within 20-30days after order confirmed. We support some small  order delivered within one week in case of emergency..
5. Validity: Minimum order quantity: USD60 per specification. Promotion price expired date: 30th, June, 2009(latest order date). Otherwise only the original price is available. We keep  the right to modify the prices without prior notice. 
6. NDA: High confidential. Do not disclose to any other third party without permission.

7. Quality:

We produce qualified products. The good material and the sufficient material is guarantee of good quality. We use Baosteel ST12(DC01) excellent cold rolled steel, then make 2-3microns copper plating, then sinter 80-100meshes bronze ball to keep the bronze and PTFE layer 0.25~0.35mm. We use HC24 thickness test machine to check the bronze layer thickness. The final products are shining polished and then get TIN(SN) plated. It is really shining products instead of only make the shining sample for show.

Physical Property:

Static load capacity: 250N/mm²

Dynamic Load capacity: 140N/mm²
Temperature: -195~+280°C
Speed limitation: 5m/s
Friction coef(u): 0.04~0.20
PV LIMIT(Dry): 3.6N/mm² .m/s
PV LIMIT(Oil): 50N/mm² .m/s

Detail price list is available, please feel free to contat us.