Supplying proprietary technology of producing an annual output of 36,000 tons of dry aluminum fluoride project

1.Project Apellation: annual output of 36,000 tons of dry aluminum fluoride project

2.Brief Introduction of Product: Aluminum fluoride

Molecular Formula: AlF₃                           Molecular Weight: 83.98

Properties: It is a white crystal or powder with relative density of 2.882 (25). It is slightly soluble in water, acid and alkali solution, insoluble in most organic solvents. It is of greater solubility in hydrofluoric acid solution. The property of anhydrous aluminum fluoride is very stable, it doesn't react with liquid ammonia and sulfuric acid by heating to fuming, isn't changeable when co-melted with KOH and cant be deoxidized. It doesn't decompose through heating, but it may sublimes when the temperature is 1291. It can be decomposed partly to HF and aluminum oxide at 300-400 by aqueous vapour. Its toxic!

3.Usages: It is used as auxiliary ingredient of electrolyte during the production of electrolytic aluminum to decrease the melting point and increase the conductivity of electrolyte, as a zymotic inhibitor in the alcohol production, as a cosolvent for glaze and enamel and a flux for non-ferrous metal, in soldering fluid of metal jointing, and to make of optical lens. It is also used as catalyst of organic synthesis and materials of synthetic cryolite.

4.Product Market Analysis

The usage of aluminum fluoride is single, mainly used in electrolytic aluminum industry (taking up about 95%). Annual requirements to aluminum fluoride in electrolytic aluminum production all over the world are approximately 1,050,000 tons.

5.Investment Contents: Total investment is about USD 19,000,000 (according to the calculation of Chinese mainland construction), including,

1.      60 acres of land, the investment quota is about USD 900,000

2.      factory warehouse and some other construction area is about 8000m², the investment quota is about USD 1,800,000

3.      facility investment quota is about USD 14,000,000

4.      transferring cost of proprietary technology, engineering design cost and some other costs are about USD 2,300,000

6.Advantages of our Technology

1.      It is a comprehensive improvement technology of German technology of 2004, at present its the most advanced technology throughout the world.

2.      The product quality reaches or exceeds AF-0 parameter of GB4292-2007, fully reaches the international market requirement.

3.      Energy-saving, consumption-reducing, low production cost and high degree of production control automation.

4.      The most advanced environmental protection disposal technology, active ingredients in wastewater can be recycled in a most reasonable way.

5.      Investment quota of the product is the most economical.

7.Services those our company supplies (the price of proprietary technology transfer is negotiable)

1.      detailed design of proprietary technology P&D of aluminum fluoride

2.      detailed design of proprietary facilities

3.      basic design of utilities

4.      basic design of electric and control

5.      general equipment selection

6.      general layout design according to the actual situation

7.      information for fire control, security, construction, environmental protection and some other designs.