Digital Audio and Video recorder inside a normal electrical outlet
Functions:USB drive,recording video and audio at the same time
Video Format: AVI
Resolution of Video: 640*480,3.0 mega pxiel
Memory:max 32GB SD card
Voice Control Recording:65 DB
Battery Capacity:900MA,3.7V
Operation:
Recording video and audio
Under Manual control mode
1.Turn the on/off button to on,press the manual recording button until the blue light turns on.
2.Press the recording button shortly,the yellow light flashes 3 times, later all the lights are off, indicating the camera starts to record video;press the recording button again, the blue light turns on,the video file is saved and the camera back to manual recording mode.
Under Voice control mode
1.Turn the on/off button to on, the blue light turns on,10 seconds later the blue light is off, the camera enters into voice control recording mode;Once the external sound is over 65DB, the camera starts to record video automatically for 5minute,later it stop recording and save data. If the external sound is over 65DB again,the camera will start to record video again and after 5 minutes stop recording.
2. Quit voice control mode
Under voice control pattern,press recording button shortly, the yellow light turns on and the camera exit voice control recording mode.To save recording data, pls save the video before exit;Press the recording button shortly again, the yellow light is off, indicating the camera back to voice control recording mode.
The indication of the light when being working :
1.Being charged: the red light will keep on, it will turn off after full charging
2.Files in the USB are being read: the orange light flashes slowly
3.In standby mode: the blue light keeps on

4.Without SD card: the blue light flashes quickly
5.The memory is full: the orange light and blue light turn on at the same time
6.Lacking of power: the orange light flashes slowly
Setting time:
1. Connect the camera with computer≥
2. Create a new .txt file in the root of the disk of the camera
3. Rename the file as .Time
4. Open the .Time file, edit the time in the file. (for example: 2009.12.12 08.08.08) , then save this file and exit, after that the time is set successfully
5. When starting the camera again next time, the time will be simultaneous as the time file.