FEATHERS  

1.  Adoption of Japanese high-precision motor and linear orbit can improve steadiness of squeegee printing; 

2.  The pressure of double-squeegee printing and the up/down motion of squeegee can be adjusted separately with printing head and throttle behind small air cylinder for fear of resonant vibrations;                                           

3.  Total Input Power & Voltage: single-phase 220V 50/60Hz, and total power: 100W;       

4.  The print head can be lifted up in inclination of 45° to facilitate installation and uninstallation of squeegee and cleaning of steel mesh;                        

5.  The print head can be moved along and fastened to make easier location of steel mesh and have a better printing effect;                                          

6.  The mesh arms can be adjusted separately on the left and right, suitable for the printing range of 470 - 750mm;

7.  The combined printing table is designed with relaining key and positioned PIN, applicable to operation of single-sided base plate and two-sided base plate;          

8.  In the plate-proofreading method, adoption of mesh arm with proofreading and adjustment of printed matter (bedplate) X, Y and Z makes proofreading easier and simpler; 

9.  Adoption  of computerized PLC empowered with human-computer interface brings you many options including single/double printing and manual/auto modes                                    

10.  The squeegee seat can be adjusted fore and aft, and squeegee blade can be adjusted in the inclination of ±15° as required in printing;                          

11.  Application of SMC pneumatic cylinder and magnetic proximity switch can make work table move to and fro and the precision of printing surface to ±0.01mm;          

12.  Operation air pressure: 4-6kgf/cm²; print station area: 300*400mm and 450*450mm (fit for XL); printing precision: ±0.05mm; and repeat precision:±0.02mm;          

13.  Configuration of auto numeration and alarm frequency setup facilitate output statistics;                      

14.  The printing dead time can be adjusted so as to meet production demand;

SPECIFICATIONS